The collocation of kitchen ceilings has always been a difficulty in home decoration, because the humidity is relatively large during this period, and there are fumes and odors. Therefore, proper materials and reasonable construction methods can be used to reduce the trouble for your future life. Xiaobian then introduces you to the popular trend of 2015 kitchen ceilings .
1, light steel keel plaster board ceiling
Gypsum board is made of cooked gypsum as the main raw material mixed with additives and fibers, with light weight, heat insulation, sound absorption, non-combustible and sawability and other properties. Gypsum board and light steel keel (pressed by galvanized sheet steel) combined to form a light steel keel gypsum board. Light steel keel gypsum board ceilings have a variety of types, including gypsum board, decorative gypsum board, fiber gypsum board, hollow gypsum board strips. There are many specifications available on the market. From the current point of view, the use of light steel keel plaster ceilings as a partition wall is used to make smallpox.
2, gypsum board ceiling
Mostly used in commercial space, the general use of 600x600 (mm, the length of the project did not indicate the unit, the unit is in mm) specifications, there are clear bone and dark bone points. Keel often uses aluminum or iron.
3, splint smallpox
It is commonly used for renovation. The plywood (also called plywood) is made by steaming and softening the logs, cutting large sheets along the annual rings, and drying, arranging, gluing, forming, hot pressing, and sawing. With light material, high strength, good elasticity and toughness, impact resistance and vibration. Easy processing and finishing, insulation and other advantages. Doing ceilings generally use 5 PCT splints. 3% is too thin and easy to arch, 9% too thick. The reason for its popularity is that it can easily create a variety of modeling ceilings, including curved, round, and square. But there is a drawback: afraid of termites.
The remedy is to spray termite-resistant potions. When the splint ceiling paint is used for some time, it may be lost. The method is to paint the varnish (varnish) before the decoration, and then do another process after it is dried. Another drawback of the splint is that the interface will crack. The method is to use the atomic ash to make up the interface during the renovation.
4, aluminum honeycomb perforated sound-absorbing board smallpox
Its structural structure is a perforated panel and a perforated back panel, which is directly bonded with an aluminum honeycomb core by an excellent adhesive to form an aluminum honeycomb sandwich structure, and a layer of sound-absorbing cloth is attached between the honeycomb core and the panel and the back panel. Since the honeycomb core in the honeycomb aluminum plate is partitioned into a plurality of closed cells, air flow is blocked, acoustic waves are hindered, the sound absorption coefficient is improved (reaches 0.9 or more), and the strength of the plate itself is increased, so that the size of the single plate can be To do more, further increase the design freedom. According to the acoustic design of the room, different perforation rate designs can be made, and the sound absorption coefficient of the combined structure can be controlled within a certain range, so that the design effect can be achieved and the cost can be reasonably controlled.
Through the control of perforation aperture, hole pitch, and according to customer requirements to change the perforation rate, the maximum perforation rate <30%, the aperture is generally selected ∮2.0, ∮2.5, ∮3.0 and other specifications, backplane perforation requirements and the same panel, sound-absorbing cloth used High-quality non-woven materials such as sound absorption. It is applicable to large-scale public-absorbed sound-absorbing wallboards and ceiling ceiling panels in subways, theaters, radio stations, television stations, textile mills, and sound-abated factories and stadiums.
Features:
(1) Large surface and high flatness
(2) high strength and light weight
(3) good sound absorption, fire protection, waterproof
(4) Easy to install, each board can be disassembled and replaced individually
(5) In terms of size, shape, surface treatment and color can be customized according to customer needs, to meet the individual needs of customers
5, shaped strips of aluminum buckle smallpox
Most of the home decoration has no longer use this kind of material, mainly not resistant to dirt and easily deformed.
6, square plated aluminum buckle plate ceiling
Use in kitchens, toilets and other places that are easily contaminated. Is the current mainstream product.
7, stained glass ceiling
A variety of patterns can be illuminated inside. Only for partial use.
8, metal grid smallpox
Information on the trend of kitchen ceilings in 2015 was introduced here. I hope this article will help everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.
Top ten brands of integrated ceilings
Matters needing attention when installing integrated ceiling type Yuba
Types of gypsum board ceilings Advantages and disadvantages of gypsum board
Home decoration kitchen ceiling feng shui stress
Ceiling Kitchen Ceiling Ceiling Design Decoration Partition Family Decoration Feng Shui Kitchen Integrated ceiling Painted wall Kitchen Glass Sliding Door Decoration Home
Flanged Carbon Steel Ball Valve
Flanged Carbon Steel Ball Valve,Mild Steel Ball Valve,Carbon Steel Flanged Ball Valve,Carbon Steel Socket Weld Ball Valve
Zhejiang Chenxiang import and export trade Co., Ltd , https://www.chenxiang-valve.com