Bi-metallic wear blocks
Chrome Carbide Laminated Wear Blocks
| Mechanical property | |
| Tensile strength | 630Mpa Min. |
| Shearing strength | 250Mpa Min. |
| Hardness | 63HRC min. |
Types---the most common ones are:
Chocky bars
Standard wear bars
Shaped wear bars
Wear buttons& donuts
Shredder/Grinder hammer tips
Wear plates
Knife edges
Skid bars, skidblocks
Elbow wear blocks
Micro-ledges
Rockbox Liners
Other sizes and shapes
Multi-function gradient cutter tooth
Applications---Typical applications include the following for the Surge, Mining, Steel, Re-cycling, OEM, Aggregate and other Heavy Industries (to name only a few of the countless applications):
Chute Linings      Ore Chutes      Crusher Chutes         Coal Transfer Chutes
Tripper Chutes      Flop Gates       Surge Bin Liners        Bucket Liners
Rock Box Liners     Skip Liners       Trough Liners          Apron Feeder Liners
Draglines           Shovels          Screen Plates          Loaders
Wear Aprons Concentration Bins Reclaimer Buckets
Loading Pocket Liners Transition Pieces Conveyor Transfer Points
Bolt Protectors Grizzly Bars Rock Box Edges
Hopper Edges Lip Protectors Adaptor Protectors
Deflector Plates Splitter/Divider Plates Wear Pads
Fan Blades Jaw Crushers Hammer Mill Inserts
Knife Inserts Crusher Bars Rolling Mill Guides
Run Out Rolls Dump Hoppers Crusher Hoppers
Floor Liners Arm & Hub Liners Truck Bed Liners
Bucket Liners Impact Wall Liners Distribution Plates
Elastomer Bonded Liners (Noise Reduction) Vibratory Feeders
Hopper (Receiving & Discharge) Liners Bucket Wheel Protection
Wear Plates
Available in a wide range of sizes, Hyper-wear Plates can be used in a combination of our standard sizes to create optimum layouts that provide the greatest impact and wear protection.
Suitable for use in chutes, hoppers, bins, liners, impact walls, rock boxes and a variety of other applications.
Very easy to use, no pre or post heating when welding.
*Unit: Millimeter (mm)
HP200-1 200X200X18
HP200-2 200X200X20
HP300-1 300X300X18
HP300-2 300X300X20
*We can accept OEM&ODM orders. Please contact us for any question.
More about our company and products, please do not hesitate to contact us. Thanks a lot!
Polyvinyl Chloride (PVC) waterproof membrane is a new polymer waterproof membrane which is made from polyvinyl chloride resin, and mixed with plasticizer, filler, antioxygen, ultraviolet absorber and other auxiliaries. we adopts automatic mixing of raw material, double-screw extruder and delicate three-roller calender equipment in the PVC membrane production. PVC waterproof membrane features dimensional stability and high tensile strength, being a best choice for many civil and industrial projects. PVC waterproof membrane mainly falls into two categories: Homogeneous & Reinforced, each with different thickness specifications. Reinforced PVC waterproof membrane employs a fabric reinforced layer in the middle, it enhances the breaking and tear strength.
Features:
- Excellent performance in aging resistance, service life of 20 years for exposed use, and 50 years for non-exposed application
- High puncture and rooting resistance, especially suitable for planting roof system
- Easy installation and hot-air welding seam, environment friendly
- High tensile strength and elongation, size stability
- Good plasticity, convenient for detailing and coners installation
- Inherently fire resistant
Performance Characteristics:
Anti-aging , high plasticity , root system penetration resistance , inflaming retarding , environmental protection stain resistance , high tensile strength ,good elongation , excellent dimensional stability , and less cost.
Executive Standard:
GB18173.1-2012 GB12952-2011
Specification:
Thickness: 1.0-2.0mm Width: 2m
Application:
Technical Data:
ASTM Standard D-4434/D-4434M ASTM Standard for
PVC Sheet Roofing
No.
Item
Specification
Type II
Type III
Type IV
1
Overall thickness of PVC sheet, min, mm (in.)
1.14 (0.045)
1.14 (0.045)
0.91 (0.036)
2
Thickness over scrim, min. mm (in.)A
0.40 (0.016)
0.40 (0.016)
0.40 (0.016)
3
Tensile strength at break, min, MPa (psi):
Machine direction
10.3 (1500)
...
...
Cross-machine direction
10.4 (1500)
...
...
4
Breaking strength, min, kN/m (lbf/in.)
...
35 (200)
48 (275)
5
Elongation at break, min, %
Machine direction
250
15B
25B
Cross-machine direction
220
15B
25B
6
Seam strength, min, % of tensile or breaking strength
75
75
75
7
Retention of properties after heat aging
Tensile strength, min, % of original
90
...
...
Breaking strength, min, % of original
...
90
90
Elongation, min, % of original
90
90
90
8
Tear resistance, min, N (lbf)
45.0 (10.0)
...
...
9
Tearing strength, min, N (lbf)
...
200 (45.0)
400 (90.0)
10
Low temperature bend
pass
pass
pass
11
Accelerated weathering test
Cracking (73 magnification)
none
none
none
Crazing (73 magnification)
none
none
none
12
Linear dimensional change, max, %
0.1
0.5
0.5
13
Change in weight after immersion in water, max, %
±3.0
±3.0
±3.0
14
Static Puncture Resistance
pass
pass
pass
15
Dynamic Puncture Resistance
passC
passC
passC
PVC Waterproofing Roll Material
Pvc Waterproofing Roll Material,Flexible Pvc Material Waterproof Roll,Pvc Sheet Rolls For Waterproofing,Pvc Waterproof Roll Membrane Material
Shandong Tianhai New Materials Engineering Co., Ltd , http://www.chinatinhy.com