Seemingly ordinary wooden furniture, once coated with wood paint, immediately become tall and uplifted with wood? But sometimes, if you do not handle it well when you paint it, it will just make you feel better. So how can we judge whether paint is in place? Today Xiao Bian gave you talk about how to check wood paint!
First, whether the wood grain is clear
This is for wood products that have a transparent effect of wood lacquer. After transparent wooden furniture is painted, the texture of the wood is not covered, and the natural texture of wood can be displayed.
For the owners who require wood grain effect, when checking the wood lacquer, it is necessary to check whether the lines on the wood surface are clear, whether the brown eyes are flat, and whether some other defects on the wood are well covered.
Second, whether there is color error
This is for wood products that make paint effects. Painted wooden furniture is painted and the lines of wood are shaded, showing the color of the paint.
Wood paint paint effect in the acceptance, we must see whether the paint surface color is even, there is inconsistency in the depth of the color, the paint required no brush pattern.
Third, the saturation of paint color
Acceptance can be used to touch the paint surface by hand and feel smooth and even in thickness. High-quality wood finishes should be smooth and smooth, free of rough and granules, and uniform in thickness. At the same time, check whether the saturation and fullness of the paint surface are good. Check the glossiness of the paint and carefully observe whether the reflection is even.
Fourth, observe whether there is little
Due to improper construction of wood lacquer, various problems may be caused in the lacquer surface, such as defects such as whitening, graining, pinholes, and cracks. For example, the surface of the paint film size particles; the color is whiter than the original, white mist; appear as small needle-like holes; surface cracks. Special attention should be paid to the existence of these more serious problems.
Fifth, side, floor brush is in place
In the acceptance of wood paint, many people may pay attention to the furniture surface of wood paint brushing effect, quality, and often overlook the side of the furniture, back, inside, bottom, etc. is very easy to brush in place. Therefore, we must pay attention to this point when it comes to acceptance. If the bottom surface cannot be seen, it can be observed with the reflection of the mirror.
Wood paint paint construction acceptance
1. Components of piston rod seal:
Polyurethane, polyformaldehyde, rubber
2. Purpose and function of piston rod seal:
The rod seal belongs to the dynamic seal. It is the seal that moves with the piston rod. It is one of the important components on the hydraulic support.
3. Use position of piston rod seal:
Guide sleeve, piston
4. Working principle of piston rod seal:
It is used at the contact part between the guide sleeve and the outer cylinder to seal the emulsion in the outer cylinder.
5. What effects will be caused by improper use or operation of piston rod seal:
1. Improper selection of cavity support material will wear the cavity and piston rod.
2. The size of the friction pair is inappropriate, causing wear.
3. Improper thread guide angle of cylinder barrel and piston end wear the sealing ring.
4. The seal ring is worn due to improper installation guide angle of the seal.
5. The surface of cavity and piston rod is rough, with scratches and worn seals.
6. The outer cylinder leaks and the jack does not maintain pressure.
Piston Rod Seal,Hydraulic Cylinder Rod Seal,Pneumatic Rod Seal,U Ring Seals,Hydraulic Seals
DG Zhongxingshun Sealing Products Factory , https://www.zxs-seal.com