Alarm on the wall | 64 series decoder articles

Are you worried about too many TV wall management devices and too many pictures to quickly locate the alarm location? ~~~

Don't worry, today Kang Kang will share with you the operation method of the linkage of the alarm screen on the large screen of the 64 decoder. In this way, you can quickly locate and find the target.

Ready to work

Before you officially start the configuration work, you must make these preparations.

1.4200 TV wall client completes decoding and wall setting.

Please poke for specific operation methods

64 series decoder decoding on the wall guide

2. Complete the alarm event setting that needs to be decoded on the video recorder.

Please poke for specific operation methods

Recorder common event alarm settings

Configuration work

1. Complete equipment arming

In the 4200 client, tool → device arming control to complete the arming operation.

2. Set the alarm window

After decoding successfully on the wall, select the right mouse button of the window that needs to display the alarm screen and click "Set Alarm Window". This window can be set as an alarm window.

3. Start linkage configuration on the wall

Click Control Panel → Event Management to start the configuration of linkage to the wall.

If an external alarm input such as a decoder, video recorder, or camera is triggered, it will also be linked to the wall after being triggered, which can also be achieved here

At this point, we have completed the alarm linkage to the wall operation. Then, as long as the motion detection alarm is triggered by the associated monitoring point in the wall, the screen of the monitoring point will be automatically displayed on the wall of the alarm window ~