| Home>Bearing knowledge>Analysis of commonly used device methods for TIMKEN bearings |
Analysis of commonly used device methods for TIMKEN bearings
Source: China Bearing Network Time: 2018-06-12
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
Oil bath heating bearings; this method can pollute TIMKEN bearings; cause premature bearing damage. Induction heating is now the most common method of heating bearings; this is due to its high controllability, power and safety. Some bearing manufacturers conclude Development specifications for induction heaters for bearing applications. Bearing induction heaters have many functions; they help to avoid damage to the bearings during heating.
Under normal conditions, most of the small and medium-sized bearings use cold devices. Traditionally, TIMKEN bearings are equipped with a hammer and an old pipe. This method can cause external forces to pass through the rolling parts; then damage the raceway. The bearing device applies external force to the selection. Pressing the cooperation of the bearing ring; help to avoid bearing damage.
Bearings are a precursor to the application of hydraulics in bearing units; these skills include oil filling and drive unit methods. These methods help to simplify bearing equipment; help to install bearings correctly and concisely. Bearing companies have also developed many bearings for bearings. Hydraulic skills devices and equipment; make these hydraulic skills put into practice.
Before the bearing is mounted on the shaft; the fixing pin of the bearing casing must be unplugged; the outer surface of the journal is polished and cleaned together; and the oil is rust-proof and smooth at the journal (allowing the bearing to slightly change on the shaft).
Apply smooth oil to the bearing seat and the bearing; place the bearing into the bearing housing. Then place the TIMKEN bearing on the shaft together with the bearing housing. Push to the desired position to carry out the device.
The bolts of the fixed bearing housing should not be tightened first; the bearing housing should be able to change in the bearing housing. The same bearing and seat on the same shaft are installed; the shaft is converted into several turns; the bearing itself is actively positioned to correct the position. Fasten the bearing block bolts.
Install a partial pain set. First set the partial pain on the migraine step of the TIMKEN bearing inner sleeve; and tighten it by hand in the direction of rotation. Then prick the small iron rod into or against the counterbore on the painful sleeve. 1. Use the hammer to strike the small iron rod in the direction of rotation of the shaft. Make the painful device firm; finally lock the hexagonal screw on the painful sleeve.
Recommend to friends comments close window
| Bearing related knowledge |
| Ceramic bearings and strengths (2) China's bearing parts thermal disposal problems and countermeasures angular touch ball bearing product features and classification of hydraulic pressure static guide bearing Use of fag bearings on tube mills |
This article links to http://
Please indicate the bearing network http://
Previous:The criteria and methods for bearing repairs are as follows: The layout of tandem thrust cylindrical roller bearings
SHAOXING ZHENGHONG AUTO PARTS CO.LTD , https://www.kontinental-bearing.com