Before reading this article, please click on the blue font " China Chemical Safety Association " under the heading of this article and click " Follow ", so you can receive the article for free. Share every day, completely free subscription, please rest assured!
1. The main content of process technology information
( 1 ) Flowchart or simplified process flow chart;
( 2 ) Information on the principles of process chemistry;
( 3 ) Estimated maximum stock;
( 4 ) Safe operating range (such as temperature, pressure, flow, liquid level or component safety upper and lower limits);
( 5 ) Assessment of the consequences of deviation from normal conditions, including the safety and health effects of employees;
( 6 ) Key process points.
A detailed list of process technical information is given in the table below .
Table process technology information content list
Process technical information name | Process technology information content |
Box flow chart or simplified process flow chart | Box flow diagrams and chemical reactions are saved in the technical manual or in a shared folder on a common drive |
Principle of process chemistry | Reactor chemical reaction, keyword: exothermic or endothermic |
Estimated maximum stock | Container capacity, meter, process flow chart according to PIC001 specification of Process Industry Practice Association Standard ( PIP ) , equipment notes should indicate tower capacity. Regularly inspect the tank area and record the storage capacity. Recording is carried out using a tank inventory, and tank capacity information should also be recorded in these tables. |
2. Method for obtaining process technology information
( 1 ) Basic process technology information can be obtained from the project process package provider or the project project general contractor;
( 2 ) Obtain detailed process system information from the design unit, including detailed drawings, documents and calculation books for each major.
(Source: China Chemical Safety Association)
[Editor: Chen Guofang]
Good things not only need to be collected, but also don't forget to share friends!
Dosing and Metering Pumps Characteristic :
1 Clean and pollution-free: fluid only passes through and touches the Peristaltic Pump hose.
2. High precision: constant current, reproducibility of up to 0.5%, and flow can be precisely adjusted.3. Low shear force: It is an ideal tool for conveying shear-sensitive and corrosive fluids.
4. Corrosion resistance: it can transport various fluids, such as organic solvents and corrosive liquids.
5. Idling and dry operation: air or gas-liquid-solid three-phase mixed transportation can also be transported.
6. Possess self-priming ability: self-priming, no need to fill the pump, no need to empty.
7. It has the function of a shut-off valve, does not siphon, has no seals, and has the functions of a shut-off valve and a check valve.
8. Two-way conveying function: reverse pumping and back-suction functions can be realized by changing the direction of the pump runner.
9. Simple maintenance: only need to replace the peristaltic pump hose, no valve and seal replacement.
Dosing And Metering Pumps,Programmable Peristaltic Pump,Water Treatment Pump,Laundry Detergent Pump
Baoding Chuangrui Precision Pump Co., Ltd. , https://www.crprecisionpumps.com