[ Huaqiang Security Network News ] 
This article mainly introduces the e-road navigation navigator port settings and manual introduction, first open the GPS navigator, connect to the computer with the data cable, if the computer can not read the space stored by the navigator, way one: re-insert the data cable and try again; If it still doesn't work, unplug the data cable, open the USB port in the GPS navigator, reset it, and select "tick" in the U disk.
e road navigation navigator manual introduction
First, the scope of application of the map:
“Kailid†is applicable to the South and the Pearl River Delta region. “City Interchange†is applicable to northern cities, and “Daodaotong†is applicable to long-distance drivers.
Navigator maps shipped with: usually the latest! ! ! Please don't download the update blindly. In addition, we recommend that users please back up all the information in the navigation before using the navigator, so that it can be used from time to time!
Second, how to connect to the computer:
First open the GPS navigator, connect to the computer with the data cable, if the computer can not read the space stored in the navigator, way one: re-insert the data cable and try again; if not, unplug the data cable, open the USB in the GPS navigator Port, reset, select "tick" in the U disk, and then connect to the computer; if it still does not work, restart the computer and try again, repeat the previous two methods until it is read.
Fourth, the setting of the e-road navigation navigator path:
Open the system settings, click on the e-road navigation path, select NandFlash (built-in map) / SDMMC (map on the external T card), and then click on the map file you need, it will appear after the suffix .EXE executable file, and then Click on this file - click on "GPS Path" in the lower right corner, then select "Tick" to save, exit to the desktop, double click on the navigator.
Five, AV parameter settings:
Video format support: WMV, ASF, AVI, RMVB
Audio format support: WMA, MP3 and WAV
Video/audio limitation: The resolution is controlled within 720×480, the best effect is 600×480, the sound bit rate is reduced to 32, and the image bit rate is reduced to 256. The parameters are for reference only. Download the “Mode Factory†from the Internet and install it on the computer to reduce the “resolutionâ€, “bit and bit rate of sound and imageâ€. The image card reduces the image bit rate, and the image smear increases the image bit rate; if the sound is not normal, the sound bit rate is adjusted (faster, the drag increases)
Sixth, the adjustment of the sound size of the navigator:
First of all, look at the protective film of the speaker to clear it. If the sound is still small, please choose bigger in the volume setting. If it is still relatively small during the navigation process, please turn up the volume in the language setting; if it is not big enough, then it will be transmitted to the car speaker through FM, let you freely adjust, the specific operation, as follows: "FM launch Setup and application."
Seven, electronic dog warning common sense:
The electronic dog warning is a fixed point detection and forecasting, and is a detection system built into the e-road navigation system.
LDT is the abbreviation of radar head. It is an external portable device for mobile speed measurement. It monitors the “advance†prompt of “mobile base station†for “mobile traffic police†(up to 1.5 km in advance), reminding you that there is mobile traffic police speed in front. Don't "speed warning"
LDT plugs in the car charger to work, has nothing to do with navigation, work independently, and does not affect each other.
If it is used in conjunction with the navigation, it must be connected via a data cable to save space and share the power of the radar head.
C/H use: long press for 3 seconds urban/suburban mode voice switching, separate trigger is volume adjustment; speaker/PND use: dial to the speaker to play the radar head (best), dial to PND can be connected via data cable Go to navigation and play (not ideal).
(Tips: navigation built-in electronic dog can only measure fixed points)
Eight, rear view installation method:
The camera is fixed on the top of the license plate; the power cable of the transmitter is connected to any of the backup lights (that is, the lights that are turned on when the reverse gear is turned on); the AV and USB cables on the receiver are inserted in the GPS, and the blind end must be plugged in.
Please fix the "transmitter" and "receiver", do not shake, otherwise it will affect the rear view effect. The reverse gear is automatically rear viewd, and the forward gear is automatically closed, no need to be set in the GPS navigator. If the direction of the reversing image is not correct, please click on the screen "any corner" to automatically adjust
Nine, FM transmitter settings and applications:
First turn on the car and adjust to the empty band (that is, the channel without radio and noise), then turn on the GPS transmitter's FM emission to the corresponding frequency of the "empty band" on the car, and then "must" plug in the car charger (Can be used as a radio antenna, while reducing noise), you can pass the navigation sound or radio to the car speakers to achieve sound reinforcement.
(Tips: Please do not turn off FM transmission when not in use in the car, otherwise there will be no sound in GPS.)
Ten, Bluetooth use and settings:
First, open the Bluetooth of the mobile phone and the navigator, and then use the navigation device's Bluetooth to search. After searching, you can connect, and then connect the code (that is, set the number of the mobile phone and the navigation to be the same, usually four digits) If you are on the right, you can use the hands-free call/telephone for navigation. Subsequent no need to connect. (If you are unsuccessful, please try a few times. The Bluetooth function of the navigation has higher requirements for the Bluetooth configuration of the mobile phone, and you need your patience.)
XI. Operation and description of TV function:
First of all, if there is a wireless digital TV signal, if you are close to the window sill at home, you must pull out the antenna in the “upper left corner†and click on the TV. The system will automatically search until the TV screen appears. If you can't receive the TV, please start over. Also, in the place where the wireless digital TV signal is strong, pull out the antenna - turn on the TV - click "Settings" - select "Scan" - it will be done automatically, after completion - - Click on "Apply" - it will automatically search - until the TV screen appears; if not - then click on the "Triangle or + -" logo on the right to select another station, it will take some time.
Still not, please click on "Channel" - click on "Scan" - select "Apply" - until the TV screen comes out OK
(Tips: Automatic search is not available, it is the default channel of the system, then click to select the next station by hand. Each time the system is clicked, the system will automatically search for it, and the TV screen will appear automatically.)
12. How to use the navigator:
First stop the car outdoors, place it at the balcony/window at home to find the satellite, open the map, and automatically search for the star. The first search time is longer, 2 to 10 minutes, when 3 satellites are found. The voice prompt will be automatically displayed and your current location will be displayed. At this time, only the “destination†can be set to navigate.
At home, only analog navigation can be realized, but “departure place†and “destination†must be set; outdoor navigation is in “crossing, tunnel, and complicated traffic sectionsâ€, and the system will automatically display 3D pictures for drivers to select routes more conveniently; Simulated navigation at home, no 3D effect.
Laboratory Peristaltic Pumps operates by pumping fluids through the Peristaltic Pump tube squeezed rotating rollers in the pump head that squeeze the liquid out of the tube with compression force.
The peristaltic pump is a liquid delivery device that can control the flow rate. It has the characteristics of high delivery accuracy, strong corrosion-resistance, small shearing effect, simple operation, easy maintenance, and can effectively avoid cross-contamination. It has a very wide range of laboratories. Applications. From cell culture to in vitro organ research, from material preparation to water treatment technology optimization, from food ingredient extraction to food preparation technology improvement, Peristaltic Dosing Pumps may be used as power to achieve accurate fluid transmission and processing operations during the experiment.
The mechanism of this pump`s action which only delivers the liquid by the tube allows fluids to be dispensed without introducing contamination. This makes them ideal for dispensing liquids in both biological and chemical labs.Laboratory Peristaltic Pumps,Lithium Mining Peristaltic Pump,Liquid Additive Peristaltic Pump,Drugs Dispensing Peristaltic Pump
Baoding Chuangrui Precision Pump Co., Ltd. , https://www.crperistalticpump.com