HSG series hydraulic cylinder double acting piston rod type hydraulic cylinder, a hydraulic cylinder locking device, accoring to the use function  is divided into: the stering cylinder, damping cylinder, cylinder, lifting folding lock cylinder, spray machine is Mainly used for fruit trees, dry field spray machinery.
Production description:
1. Harvester hydraulic cylinder ZG,HSG series of two hydraulic cylinder, by ysing the function into the header tank, ear box cylinder, cylinder, gear grinder bridge cylinder, cylinder and the rear axle steering cylinder, mainly used in wheat harvester, corn harvester, rice harvester, forage harvester harvesting machinery etc...
2. Rigid welded construction, high tensile welded steel end mounts, threaded gland and quality seals allow industrial cylinders to work in harsh conditions.
3. Speed range: Speed range of operation (excluding cushion parts) is less than 200mm/s. In accordance with customer requirements, the maker can also supply other ranges of speed.
4. The operating temperature (oil and ambient) is -30 to +80 degrees Celsius, but the unit should not be used when oil is frozen.
Installation method:
The most commonly used mounting options are flange, trunnion, clevis, pin-eye, cross-tube, spherical, and tang. Cylinder mounting is chosen based upon the application's requirements.
Piston Seals:
Low friction, high load piston seals with outboard wear bands are standard. Loaded lip seals and cast iron rings are optional.
About piston rod:
High strength damage resistant piston rod provides 100,000 PSI minimum yield material in 1" through 4 1/2" diameters. Larger diameters vary between 50,000 and 75,000 PSI minimum yield material. All rods are case hardened to 50-55 RC and hard chrome plated to provide maximum wear life. Stainless steel is also available. The hard chrome plated of the piston rod according to your requirement.
Key features:
pressure ranges: could be customized
Piston Ø: customized
Piston rod Ø: customized
Mounting types: customized
Max. stroke speed: according to the product types
Â
Â
   
| Material of cylinder tube | alloy steel, stainless steel, carbon steel, 27 SIMN and so on |
| Coating | All tubes are chrome plated |
| Working pressure | 10MPa-36MPa |
| Bore size | 40mm-200mm |
| Color | Any color, if you needed |
| Mouting Type | Earring-tunnion, double tunnion, double earring (eye end) |
| Plunger | 20#, 45# steel with high frequency quenching |
| Certification | ISO9001:2008, SGS, TS16949 |
| Warranty | One year |
| Working temperature | -30° C to 80°C |
| Model No | 4TG-E180*2OO |
| Stroke | 150-1000mm |
| Package | Shrink film, pallet, plywood case, carton box |
| Main export market   | USA, Canada, South Korea, Russia, Australia, Malaysia, Fiji Island, Kenya, Philippines, Singapore |
| payment terms | T/T, L/C, D/A, D/P AND SO ON |
| Delivery time | 30 days after down payment |
Â
Some models and main technical parameters of HSG series hydraulic cylinder  Â
|  HSG series hydraulic cylinder plant protection machinery | |||
|  type | diameter of rod (mm) |
 stroke (mm) |
mounting distance(mm) |
| HSG80/50*190-800 | 80 | 190 | 800 |
| HSG80/50*210-510 | 80 | 210 | 510 |
| HSG70/30*760-1055 | 70 | 760 | 1055 |
| HSG40/22*270-495 | 40 | 270 | 495 |
| HSG50/25*150-800 | 50 | 150 | 800 |
| HSG63/35*500-780 | 63 | 500 | 780 |
Any types of Engineering Machinery Model could be designed according to your requirement.
If you're interested in our products, please contact with us.
Send us your drawings and the main parameters:
A.
1. bore sizeÂ
2. stroke length
3. rod diameter
4. mouting typeÂ
5. mouting length
6. paint color requirement
B. the pruduction application description details
1. type of machine (loader, steer loader, excavator and ect.)
2. type of function (hoist, swing, steering, and ect.)
3. type of struction (piston, telescopic)
4. single or double actingÂ
5. operating pressure
Certification
  
Quality Control:
1. External Inspection: Purchased Item Inspection, Outsourcing Item Inspection
2. Process Inspection: First Inspection, Random Inspection, Handover Inspection
3. Final Quality Inspection: External Dimensions Inspection, 100% Hydraulic Test
4. Type Inspection
Every piece of hydraulic cylinder are tested and will send out only after they are pasted the each test.
Our company has abundant technical force and perfect testing means. By making wide technical and business cooperation with many related enterprises, universities, colleges and institutes both at home and abroad, and employing senior engineers and software engineers, we have greatly strengthened and improved our designing, processing, and testing abilities.
FAQ:
1.Are you a manufacturer?
We are professional manufacturer in hydraulic. We will provide competitive price.
2.What is your warranty?
Our products are all available for one-year free warranty and product lifetime consulting service.
3.How to ship your products?
We are transported by sea, by air or by international express.
4. Do you support OEM service?
Yes. OEM service is available.
5. Is your design reasonable?
We have professional R&D team with rich design experience.
Â
Â
Â
HSG series hydraulic cylinder double acting piston rod type hydraulic cylinder, a hydraulic cylinder locking device, accoring to the use function  is divided into: the stering cylinder, damping cylinder, cylinder, lifting folding lock cylinder, spray machine is Mainly used for fruit trees, dry field spray machinery.
Production description:
1. Harvester hydraulic cylinder ZG,HSG series of two hydraulic cylinder, by ysing the function into the header tank, ear box cylinder, cylinder, gear grinder bridge cylinder, cylinder and the rear axle steering cylinder, mainly used in wheat harvester, corn harvester, rice harvester, forage harvester harvesting machinery etc...
2. Rigid welded construction, high tensile welded steel end mounts, threaded gland and quality seals allow industrial cylinders to work in harsh conditions.
3. Speed range: Speed range of operation (excluding cushion parts) is less than 200mm/s. In accordance with customer requirements, the maker can also supply other ranges of speed.
4. The operating temperature (oil and ambient) is -30 to +80 degrees Celsius, but the unit should not be used when oil is frozen.
Installation method:
The most commonly used mounting options are flange, trunnion, clevis, pin-eye, cross-tube, spherical, and tang. Cylinder mounting is chosen based upon the application's requirements.
Piston Seals:
Low friction, high load piston seals with outboard wear bands are standard. Loaded lip seals and cast iron rings are optional.
About piston rod:
High strength damage resistant piston rod provides 100,000 PSI minimum yield material in 1" through 4 1/2" diameters. Larger diameters vary between 50,000 and 75,000 PSI minimum yield material. All rods are case hardened to 50-55 RC and hard chrome plated to provide maximum wear life. Stainless steel is also available. The hard chrome plated of the piston rod according to your requirement.
Key features:
pressure ranges: could be customized
Piston Ø: customized
Piston rod Ø: customized
Mounting types: customized
Max. stroke speed: according to the product types
Â
Â
  Â
| Material of cylinder tube | alloy steel, stainless steel, carbon steel, 27 SIMN and so on |
| Coating | All tubes are chrome plated |
| Working pressure | 10MPa-36MPa |
| Bore size | 40mm-200mm |
| Color | Any color, if you needed |
| Mouting Type | Earring-tunnion, double tunnion, double earring (eye end) |
| Plunger | 20#, 45# steel with high frequency quenching |
| Certification | ISO9001:2008, SGS, TS16949 |
| Warranty | One year |
| Working temperature | -30° C to 80°C |
| Model No | 4TG-E180*2OO |
| Stroke | 150-1000mm |
| Package | Shrink film, pallet, plywood case, carton box |
| Main export market   | USA, Canada, South Korea, Russia, Australia, Malaysia, Fiji Island, Kenya, Philippines, Singapore |
| payment terms | T/T, L/C, D/A, D/P AND SO ON |
| Delivery time | 30 days after down payment |
Â
Some models and main technical parameters of HSG series hydraulic cylinder  Â
|  HSG series hydraulic cylinder plant protection machinery | |||
|  type | diameter of rod (mm) |
 stroke (mm) |
mounting distance(mm) |
| HSG80/50*190-800 | 80 | 190 | 800 |
| HSG80/50*210-510 | 80 | 210 | 510 |
| HSG70/30*760-1055 | 70 | 760 | 1055 |
| HSG40/22*270-495 | 40 | 270 | 495 |
| HSG50/25*150-800 | 50 | 150 | 800 |
| HSG63/35*500-780 | 63 | 500 | 780 |
Any types of Engineering Machinery Model could be designed according to your requirement.
If you're interested in our products, please contact with us.
Send us your drawings and the main parameters:
A.
1. bore sizeÂ
2. stroke length
3. rod diameter
4. mouting typeÂ
5. mouting length
6. paint color requirement
B. the pruduction application description details
1. type of machine (loader, steer loader, excavator and ect.)
2. type of function (hoist, swing, steering, and ect.)
3. type of struction (piston, telescopic)
4. single or double actingÂ
5. operating pressure
Certification
  Quality Control:
1. External Inspection: Purchased Item Inspection, Outsourcing Item Inspection
2. Process Inspection: First Inspection, Random Inspection, Handover Inspection
3. Final Quality Inspection: External Dimensions Inspection, 100% Hydraulic Test
4. Type Inspection
Every piece of hydraulic cylinder are tested and will send out only after they are pasted the each test.
Our company has abundant technical force and perfect testing means. By making wide technical and business cooperation with many related enterprises, universities, colleges and institutes both at home and abroad, and employing senior engineers and software engineers, we have greatly strengthened and improved our designing, processing, and testing abilities.
FAQ:
1.Are you a manufacturer?
We are professional manufacturer in hydraulic. We will provide competitive price.
2.What is your warranty?
Our products are all available for one-year free warranty and product lifetime consulting service.
3.How to ship your products?
We are transported by sea, by air or by international express.
4. Do you support OEM service?
Yes. OEM service is available.
5. Is your design reasonable?
We have professional R&D team with rich design experience.
Â
Â
Â
Residential Elevator,Residential Lift,Residential Building Lift,Private Residential Lift
IFE Elevators Co.,Ltd. , https://www.ife.cn