Jinshali Shower Room Anwar Sanitary Wares New Zhongyuan Ceramics
First, the ceiling design.
The water vapor in the bathroom is heavy, so it is very important to choose those materials that have waterproof, anti-corrosion, and anti-rust properties as the ceiling.
Second, the ground points.
The bathroom must be waterproof before laying the tiles; after the tiles are laid, ensure that the brick surface has a drain slope (usually about 1% is appropriate), the slope is facing the floor drain; the floor must be closed after laying the tiles In experiments, the time must be at least 24 hours. When paving the floor tiles, attention should be paid to aligning and aligning the tiles to ensure the overall feeling of the entire bathroom, so as to avoid visually disturbing impressions.
Third, consider the wall.
Bathroom wall tiles should pay attention to moisture, waterproof, and to ensure the formation of a smooth tile, and to be seamed and aligned with the floor tiles, to ensure that the overall sense of the wall and the ground; such as water supply pipe outlet encountered, the incision of tiles To be small and appropriate, it is convenient for the flange cover on the water feeder to cover the incision, making the appearance perfect and natural.
Fourth, pay attention to doors and windows.
It is best to have windows in the bathroom for ventilation; if there are no windows that are unacceptable for ventilation, special attention must be paid to the details of the doors. To prevent the water in the bathroom from spilling out, the door should be slightly higher than the inner side of the bathroom; the gap between the door and the floor of the bathroom should be kept a little larger to facilitate air return; if it is a sliding door, but also in the sliding door and Make a waterproof layer between the bathroom tiles to prevent seepage.
Fifth, pay attention to the laying of circuits.
The wire joints in the bathroom must be tin-plated, and waterproof tapes and insulating tapes must be wrapped in order to ensure safety; the wire body must be covered with flame-retardant tubes; all switches and sockets must have moisture-proof boxes, and the position must also be considered Depending on the size and location, it is easy and reasonable to use, so as to reduce unnecessary troubles.
Sixth, strict waterproof road reconstruction.
Bathroom water supply and drainage line is best not to make too much changes, if you want to change, according to the specific circumstances, such as the washing machine model, the location of the water will be different, so the best waterway.
The seventh, the installation of a good sanitary ware.
It is advisable to remember the hole distance before the decoration, and select the bathtub, bath room, toilet, wash basin and other sanitary ware according to the size, so as to avoid improper size during the decoration; the installation of the toilet shall be sealed with toilet mud first. Then fix it with expansion screw or glass glue so that it is easy to repair and leave space when the toilet is clogged.
Eighth, emphasis on ventilation.
There must be an exhaust fan in the bathroom, and the exhaust fan must be provided with a retrograde gate to prevent backflow of dirty air, non-gas backflow, etc.
Nine, set aside green embellishment.
To add a bit of anger, the bathroom should not be a corner forgotten by the green. In this way, during the renovation, you can choose some shade-tolerant, humid, and potable plants to be placed in the bathroom, which will add a bit of anger to the bathroom.
Links: Four practical tricks to teach you to shorten the summer decoration time
The acceptance of the seven new housing details becomes a non-negligible item
Construction Acceptance Zhongyu Sanitary Decoration Company Window Home Decoration Design New House Glass Glass Tile Glass Sliding Glass Doors Bathroom Sliding Doors Bathroom Tiles Bathroom Doors Bathroom Wall Tiles Bathroom Doors Dimensions Bathroom Dimensions Bathroom Sinks Integral Bathroom Toilet Design Toilets Waterproof Bathroom Tiles Tile Glue
What is track lighting used for?
Led track lighting is a lamp installed on the track. There is no fixed space for the use of track lights. Whether it is commercial lighting or home lighting, it can be used. For example, the commercial lighting, whether the store can attract passersby into the store depends largely on the lighting effect. And LED Track Lights system can be very good lighting effect, can attract customers for your store. Because the Track Light system contains many types of lights, such as ambient lighting, accent lighting, and task lighting.
LED Track line lights and Slim Track Linear Lights belong to ambient lighting, with a relatively large illumination range to ensure the basic lighting of the environment. It is suitable for commercial places such as supermarkets and clothing stores to give the space a basic brightness so that the eyes can distinguish objects more comfortably.
COB LED Track Light belongs to accent lighting and task lighting. The position and irradiation direction of the Led Spotlight can be adjusted flexibly. Because of the focusing effect, it can better highlight the texture and details of the product and attract people's attention. Such as jewelry, counters, brand signs, window areas and merchandise display areas can use the Cob Spotlight.
Track Light ,Retail Lighting,Supermarket Light,Store Light,Led Track Lighting
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelights.com