Water and electricity decoration is a very important part of home improvement. When refurbishing, the owners will also attach great importance to it. For home-installed water and electricity installations, only professional personnel are generally more experienced. In order to let everyone know more about home-installed water and electricity installation, the following Xiaobian gives you information on home-installed water and electricity installation .
Home installed hydropower installation knowledge
1, the pipe slot
When installing hydropower, it is necessary to first groove the pipe. The groove of the pipe includes two aspects: one is the groove of the water pipe, and the other is the groove of the wire line. When the pipeline is being grooved, the owner is better able to personally inspect the quality on the spot to ensure that the horizontal and vertical lines are played before the slotting and the construction is carried out according to the line.
2, water pipeline installation
The installation of water pipelines in hydropower installation is very important. Most of the water pipe materials are PPR pipes and aluminum plastic pipes, and the installation of water pipes should pay attention to the placement of the faucet. The owner must personally supervise and observe them, so as to ensure its practicality.
3, wire wiring
Wires are a key material in hydropower installations. Common wires on the market have copper cores of 2.5-6 square meters. When installing the wires, separate the strong and weak currents, switches, air conditioning sockets, and electrical outlets from each other so that the rear panel installation will be evener.
4, water inspection
After the completion of the construction, it is necessary to carefully inspect the water pipes for any quality problems. This can eliminate water safety hazards. When testing, you can use the method of pressure test. First, you will bet the gambler to die all the mouths. Use the pressure gauge to test the water. After checking, check all the pipes and all joints. If there is no leakage, it means that the pipe installation is qualified.
Hydropower installation should pay attention to what
1, in the design of the waterway, we must first think of all the water-related equipment, such as water heaters, water purifiers, washing machines, toilets and wash basins, etc., to think of a good installation location, method and whether it needs hot water.
2, the bathroom in addition to wash basins, mop pool, clothing and other outlets, it is best to install a faucet to facilitate water later.
3. It is advisable to have a property present at the time of the pressure test. This can play a supervisory role and prevent some decoration teams from defrauding the owners. The method of suppressing pressure is to open the “backwater valve†of the pressure pump to form a loop, to see if there is any pressure in the tube, especially for the electric pressure pump, we should pay more attention to it.
4. After the waterway is installed, it is necessary to check whether the waterway in each place is kept clear, such as whether each outlet of a faucet, such as a kitchen, a bathroom, or a balcony, is unobstructed. If it is found that the drainage is slow or the drainage is poor, the property should be dredged in time.
Xiao Bian summary: on home improvement and installation of water and electricity, water and electricity installation to pay attention to what the content is over, presumably we all understand it! Home-installed water and electricity installation knowledge is very important for the decoration of water and electricity, Xiao Bian suggested that the parents who want to prepare for decoration should know more about it.
Home installed hydropower installation knowledge
Filters,Analyse Test Cuvette,Analyse Quartz Cuvette,Cuvette & Flat Plate
Yixing Jingke Optical Instruments Co.,Ltd. , https://www.jkgxcn.com