Cabinets must consider the outward projection of the door line on the side of the wall to avoid the influence of opening and closing of doors, drawers and baskets.
 Snowy cabinets   Fuyou cabinets
Home Knowledge Corner Cabinet layout notes:
1, a range hood and a group of stove as far as possible not to paste the side wall to avoid the pot along the wall and other contradictions.
2, cabinets on the side of the wall must take into account the external line of the door line to prevent the opening and closing of doors, drawers and baskets affected.
3, between the sink and the stove to leave enough space to use more than 800 is appropriate, but it should not be too far away, making the back and forth when maneuvering.
4, pay attention to the reasonable configuration of accessories, although the variety of cabinet accessories, but for each kitchen accessories and different, to achieve the use of convenient, functional and can be.
5. The joint area of ​​the corner of the countertop must have a fair range of area to avoid the influence of force and cause fracture.
6. Pay attention to the reserved position of the outlet. The outlet between the countertop and the hanging cabinet should be far away from the position of the sink. The outlet of the refrigerator should be set on the side or upper side of the front wall, and there should be kitchen treasure. Microwave oven. grease pump. Disinfect the cabinet. Oven and so on.
7, the location of the water inlet and outlet, the water pipe is best not less than 400mm, easy to connect the faucet and kitchen treasure, etc., the height of the sewer pipe is best not to exceed 100mm or not less than 200mm, so that when the cabinet is installed, the cabinet The moving saw is reduced to a minimum. Since the bottom of the cabinet has adjustment feet, the position of the bottom plate is generally between 100mm and 140mm.
8. The rectification of gas pipelines needs to be coordinated with the gas company. It is advisable to align the gas pipelines with the intake manifolds so as to reduce the area of ​​the pipe-packing plates on the surface of the platforms so as to enlarge the area of ​​use of the mesa pipelines and do gas pipelines in advance. The rectification facilitates the opening of the cabinets for dredging.
9. There are two methods for installing the smoke machine pipe: First, before laying the tile ceiling, it is better to preset the smoke machine pipe inside the ceiling and seal the edge, calculate the position of the smoke machine outlet, and the second is Settled in the lower part of the ceiling, after the installation of the wall cabinet is covered with a capping plate. The condition of this form is that the distance from the air wall to the front wall should not exceed 300mm.
Cabinets Aisle Ceilings Living Room Ceiling Sockets Taps Microwave Home Furnishings Drawers Cabinet Doors Kitchen Doors
Tongyun Pipe Industry Co., Ltd , http://www.lcsteelpipes.com