The toilet at home has been used for a long time. The toilet lid suddenly broke, and then I replaced it myself. I found that replacing the toilet lid is so simple. Let me share it with you today. The following is how I changed the toilet lid and what should I pay attention to when changing the toilet lid?
1. How to change the toilet lid
1. How to change the toilet cover ? The toilet is fixed with two bolts, one on the left and one on the left. Generally, plastic bolts and nuts are used, so it is more convenient to disassemble.
2. Hold the bolt with one hand, and loosen the nut with the other hand, so that the toilet lid can be easily removed. Remember to loosen counterclockwise and tighten clockwise.
3. How to change the toilet lid ? After removing the broken toilet lid, we need to measure the size, measure its hole distance, length, width, so it is more convenient to buy the toilet lid.
4. When you go to buy, you can take a photo, and then show the photo to the merchant, let the merchant see if the toilet is O-type, U-type, or V-type. These three types are not easy to distinguish. Generally speaking, most toilets are used There are many V-shaped.
5. How to change the toilet cover, please pay attention to the newly purchased toilet cover accessories, and then fix the bolt and the buckle to the bracket, and the two left and right buckles can slide to facilitate the insertion into the bolt hole.
6. Put the bolt in the screw hole, and then fix it with a screwdriver to ensure that the bracket does not slide.
7. How to change the toilet cover, the new toilet cover is aligned with the bracket mouth, the toilet cover will be stuck into the bracket, and it can be fixed tightly, so that it can be replaced, is it very simple.
The above is how to change the toilet lid. You can understand that you can replace it later, you do n’t need to ask the maintenance master, and then take a look at what you should pay attention to when replacing the toilet lid?
Second, what should be paid attention to when replacing the toilet lid
1. In addition to selecting the appropriate size of the toilet cover, it is also necessary to pay attention to the position of the toilet cover during installation. It is best to clean it before installation to keep the toilet clean.
2. At the root of the toilet cover, there will be two round screws, which are used to fix the toilet cover. Some use a cover plate to seal, just pick up the cover plate, and then remove the screws, the toilet cover will be You can take it off and then install a new toilet lid.
3. Make sure to tighten the toilet lid screws a little. If there is any shaking during later use, this will affect the service life of the toilet.
Editor's summary: Regarding how to change the toilet lid , and what to pay attention to when replacing the toilet lid, I will share it for everyone. If your toilet lid is broken, you can refer to the above and replace it yourself. There is no need to ask a maintenance master. It is very simple!
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Elevator Door Motor, Door Operator Box, Door Motor Drive, Door Operator Box
Suzhou FUJI Precision Elevator Co.,Ltd , https://www.profuji.com