When we were renovating the old house, because we didn't like the original pattern, many people chose to remove the wall to change the indoor layout. However, facing the load-bearing wall, we are very contradictory. I don't know if it can be dismantled. This is also a point that many people are confused about. So how do you distinguish the load-bearing wall? Many people don't know it! Today, Xiaobian will take a look at how to distinguish the load-bearing wall and the load-bearing wall can be removed?
How to distinguish the load-bearing wall
First, how to judge the load-bearing wall?
It is said that the load-bearing wall cannot be dismantled, but which are the load-bearing walls and which are the non-bearing walls? The good way to distinguish the load-bearing walls is to look at the architectural drawings, but sometimes there is no relevant information in the hand to distinguish them mainly through the wall thickness: generally 240MM or more The wall is the load-bearing wall. Some walls that are indistinguishable from thickness, such as exterior walls and walls shared by neighbors, are also load-bearing walls. In the general brick-and-concrete structure, except for the partition wall of the bathroom and the kitchen, there are load-bearing walls. The partition walls inside the house with frame structure are generally not load-bearing walls.
Second, can the load-bearing wall be removed?
If you remove the load-bearing wall, your neighbor has the right to sue you and ask you to recover. Therefore, in order to be safe, do not dismantle the load-bearing wall. Of course, there are also professional construction companies that can remove some load-bearing walls and then use the reinforcement methods such as planting bars and bonded steel to achieve the original bearing capacity, but the property should be approved before construction.
Third, can the load-bearing wall open the door?
Aside from the legal level of constraints, from the technical point of view, of course, you can open the door, nothing more than to do the subsequent reinforcement work, usually used to strengthen the method of steel or carbon fiber, but this reinforcement program and demolition construction must be It must be done by a qualified unit, but also if the property permits, but it must be embedded in the channel, and the door should not be too wide, but it is recommended not to knock the load-bearing wall, because the neighbor is entitled to sue you. And ask you to recover.
Can the load-bearing wall be dismantled?
The load-bearing wall refers to the wall supporting the weight of the upper floor. The black wall on the engineering drawing will destroy the entire building structure. The non-bearing wall refers to the wall that does not support the weight of the upper floor. The function of separating from another room is a hollow wall on the drawing. Whether or not this wall has no major influence on the building structure.
Simply put, the slab is supported on structural members such as load-bearing walls and beams. In our houses, the weight of the slab, the weight of the furniture, etc., are transmitted to the load-bearing walls and structural beams through the slabs, and then transferred to the lower load-bearing walls or structural columns through the load-bearing walls and beams, and then transmitted to the foundation. Forming the structural skeleton of the entire house, like the bones of the human body, is an important part of determining the safety of the entire house. So definitely can't be removed.
Bearing wall decoration
1. Add a new wall to select materials according to the situation
High-rise buildings generally adopt a frame structure, that is, the external wall is load-bearing, and the inner wall is generally a light-weight structural wall. Therefore, when adding a new wall, a light-weight wall such as a cement slab wall or a gypsum board is generally used, and sound insulation can be selected. Good or cost-effective materials.
2. Note that only non-bearing walls can be removed
The wall that can be dismantled, only the non-bearing wall, the non-bearing wall is generally thin, roughly 10 cm thick, and these walls are generally marked on the floor plan. However, it should be noted that if the residents of the entire building are free to dismantle the non-bearing wall,
Greatly reduce the earthquake resistance of the building.
3. Pay attention to the transformation of circuit pipelines
Before the demolition, the direction of the circuit transformation should also be considered in detail. Generally, there are circuit pipelines in the wall, so be careful not to brutally construct and break the circuit.
And if you remove the load-bearing wall, your neighbor has the right to sue you and ask you to recover. Therefore, in order to be safe, do not dismantle the load-bearing wall. The above is how Xiaojie edited the load-bearing wall for everyone today and the load-bearing wall can be dismantled. It is over here. If you want to know more information, please continue to pay attention to the decoration home.
More related wonderful reading:
Can the load-bearing wall open the door? Can the load-bearing wall open?
Can the load-bearing wall be dismantled?
Precautions for removal of multiple load-bearing walls for hidden dangers of load-bearing walls
Home decoration, do not arbitrarily dismantle the wall, non-bearing wall, demolition
How to distinguish between load-bearing walls and non-bearing walls? Four common methods of identification
Can the load-bearing wall be transformed? Bearing wall renovation related issues
Aluminium Alloy Swing Door Handle
Aluminium Alloy Swing Door Handle,Electronic Screen Panel Sliding Door Handle,Stainless Steel Door Handle,Zinc Key Hidden Wooden Door Handle
BOGO HARDWARE & FITTING CO.,LTD , https://www.bogohardware.com