MCH6 series products are mainly filled with air from positive pressure air respirator cylinders in the diving and firefighting industries. Because of their good quality, light weight, high exhaust working pressure, and economical price, they are also used for CNG car modification. Airtight test, shooting, paintball and other industries. MCH6 is a four-cylinder four-stage high-pressure air compressor.
installation
Please place the unit on a level surface. Please ensure that the installation area can ensure good ventilation and heat dissipation of the unit. Make sure there is no danger of dust, explosion, corrosion and fire in the installation area. When the unit is operating at an ambient temperature above 40 ° C, use an air conditioner to cool the space. Please ensure that the unit is more than 1M away from the wall. Please ensure that the distance between the unit and the ceiling exceeds 1.5M. Please ensure that the installation area is well illuminated and that various components and instruction labels are clearly visible.
Come on
Before each use of the compressor, the oil level must be checked. Add 0.3L of lubricating oil (model CE750). The normal oil level should be between two points on the scale of the oil needle. Please do not use when the oil level is lower than the scale, add a little lubricating oil to the specified oil level scale before continuing to use. The added lubricating oil can not be higher than the oil level scale, too high oil level will cause blockage of the valve.
Connect the power supply
The power supply of the compressor is divided into MCH6 / EM single-phase 220V, 18A and MCH6 / ET three-phase 380V, 6. Requires a separately controlled power supply, 220V directly connected to the power supply can be used, 380V is three live wires and a ground wire, pay attention to the direction of rotation of the motor when wiring (note the turning sign on the fuselage). If the direction is found to be incorrect, you can swap any two of the three-phase positions. Note: When the voltage is too low, the speed of the motor will slow down or fail to start. If the voltage is too high, it may cause the motor to burn out. Please make sure Use after the voltage is normal.
Other Thread Inserts,Thread Insert With Slot,Thread Other Fasteners Inserts,Self Cutting Insert
Shenyang Helisert Technology Co., Ltd , https://www.helisert.com