First, solid wood flooring
The moisture content of solid wood flooring is generally maintained at 8 to 13%. As long as the floor is kept dry and clean, under normal circumstances, there is generally no problem. However, improper laying and use can cause quality problems in solid wood flooring, such as no moisture treatment when laying; wet with water or scrub with soda water or soapy water, which will destroy the brightness of the paint; the bathroom and the room floor are not isolated. In the summer, there is no attention to pull the curtains, so that the floor in front of the window is discolored and cracked after exposure to hot sunlight; or the temperature of the air conditioner is too low, causing the temperature difference between day and night to change too much, causing the floor to expand or contract excessively and cause deformation and cracking. .
Then, the problem with solid wood flooring is, what should we do? If it is found that individual floors are uplifted or peeled off, the floor should be taken in time, the old glue and ash should be removed, new glue applied, compacted; if individual floor paint film If it is damaged or white, it can be polished with 400# water sandpaper and soapy water, then wiped clean. After it is dry, apply partial color. After drying, apply a paint again. After drying for 24 hours, polish it with 400 water sandpaper. Polish the wax for polishing. It is also the best way to maintain wax once a month, but dry the water vapor and stains before waxing.
Second, solid wood composite flooring
The parquet is laminated by the interlaced plates of different tree species, which overcomes the shortcomings of the solidity of the solid wood floor, the shrinkage and shrinkage rate is small, the dimensional stability is good, and the natural wood grain of the solid wood floor is retained. Comfortable foot feel. Parquet has both the stability of the laminate flooring and the aesthetics of the solid wood flooring, and it has environmental advantages. Therefore, the maintenance of solid wood composite flooring is much simpler than that of solid wood flooring. Lanzhou installed cool network reminds everyone to pay attention to the following points in daily use and maintenance: 1. Keep the floor dry and clean, not allowed to use dripping water. Mop the floor, or wipe the floor with alkaline water or soapy water to avoid damaging the gloss of the paint surface; if the air in the house is dry, the mop can be wet or put a basin of water on the heater or humidify with a humidifier. 2. Try to avoid sun exposure, so as to prevent the surface paint from aging and cracking under ultraviolet light for a long time. 3. If the surface of the board is inadvertently 5, the stain should be removed in time. If there is oil, use a rag, warm water and a small amount of washing powder. If it is a drug or a pigment, it must be removed before the end of the stain penetrates the surface of the wood. 4. The floor should avoid contact with the water for a long time, especially if it is not in contact with hot water. Therefore, once hot water is scattered on the floor, Wipe dry in time; 5. It is best to take the wax once every three months, and clean the stain on the floor surface before waxing. In fact, it is not possible to play, but it is often waxed to maintain the smoothness of the floor and extend the service life of the floor. 6. Avoid sharp objects scratching the ground, do not throw cigarette butts on the floor or place too hot things directly, try to avoid dragging heavy furniture.
Third, laminate flooring
The use of laminate flooring is relatively simple. In daily use, please pay attention to the following points: 1. All wooden floors will change their moisture content with the increase or decrease of moisture in the environment or temperature changes. 2. The floor does not need to be waxed and paint. Do not polish with sandpaper for polishing. 3. It is recommended to place a mattress at the door to prevent dust particles from being damaged and damage the floor. 4. Please clean the floor surface with stains and oil stains. Do not use a lot of water to clean the floor. 5. In the dry areas of the north, in the winter, attention should be paid to increasing the humidity of the floor surface, mopping the floor with a moist mop, and appropriately increasing the surface humidity, which can effectively solve the gap and cracking of the floor. If cracks occur in individual locations, please notify the sales unit in time to fill in the parts. After filling, the surface moisture is appropriately increased to facilitate the restoration of the floor. 6. Please pay attention to the window during the rainy season to avoid rain. 7. Heating, air conditioning and other indoor facilities, please pay attention to maintenance, so as not to leak water to soak the floor. In case the floor is found to be soaked, the floor soaked in water should be removed as soon as possible, dried in a cool place or notified to the sales unit for processing. 8. Where water is easy to accumulate, due to special attention, timely treatment of stagnant water to prevent long-term immersion of the floor.
A Hammer Drill, also known as a percussion drill or impact drill, is a power Tool used chiefly for drilling in hard materials.It is a type of rotary drill with an impact mechanism that generates a hammering motion. The percussive mechanism provides a rapid succession of short hammer thrusts to pulverize the material to be bored, so as to provide quicker drilling with less effort. If a hammer drill's impact mechanism can be turned off, the tool can be used like a conventional drill to also perform tasks such as screw driving.
Impact Drill
Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com