Lihao
The transmission components on the Lihao automatic feeder mainly include conveyor belts, gears, bearings, pneumatic devices of air feeders, etc. The fit of these components will also affect the feeding accuracy of the feeder, and it is the key factor determining the service life of the feeder. Therefore, in daily use, the maintenance and maintenance of the automatic feeder drive components is essential.
Mainly related to the normal use of the automatic feeder drive components are the oil tank, the hydraulic cooling system, the electrical induction device, and the machine guard. Therefore, before using the automatic feeder, it is necessary to remove the foreign matter between the feeder drum and the gears, iron scraps, and clean the surface tools of the machine; check whether the oil in the oil pool and fuel tank is sufficient, and whether the oil passage is unblocked; check whether the hydraulic and cooling systems are normal. The low-speed empty car runs for 3-5 minutes to check whether the gears of each part are running normally; the transmission parts of the feeder have protective devices to prevent foreign objects from falling or injuring people, and to ensure their complete existence.
Automatic feeder operation, it is strictly forbidden to use super-performance overload machine tools, such as ultra-wide material, super thick, and overfeed speed; if abnormal phenomena such as vibration and abnormal noise of the feeder occur, stop immediately, find out the cause, and deal with it in time to eliminate Wipe, adjust, measure, and clean during automatic feeder operation.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Characteristics and Advantages
(1) Intelligent control design: adjustable main parameter and secondary parameter automatically according to the weight of door leaves;
(2) Low noise: Special static sound track, integration of motor, worm-gear and retarder.
(3) Anti-clamping function: automatically reverse when meeting barriers;
(4) Unique electronic motor lock: the motor will lock up when the door is forced to open.(controlled by remote or switch)
(5) Tighten force: seal door when closed, power consumption approximately 10W under standby;
(6) Advanced brushless motor(36V,100W) can automatically adopt different heavy door leaves;
(7) Bi-doors inter-locking: one of the door leaves always remains closing;
(8)Safety sensor terminal: sensor stops working when door closed;
(9)Unique coating technology: never rusty;
(10)Easy and convenient to install;
(11)Working Process: when the door leaf closes to the right place, the door leaf will slightly shift to the door frame and the ground. The rubbers on the four sides of the door leaf will completely combine with door frame and ground, which ensures air tightness. When the door is open, the rubbers will separate from door frame and ground, which avoids contraction on the ground.
Technical Specification
|
Specification |
Light Duty |
Heavy Duty |
||
|
Rang of the Door |
Single-Leaf |
Double-Leaf |
Single-Leaf |
Double-Leaf |
|
Door leaf max weight |
100kg |
100kg x 2 |
200kg |
200kg x 2 |
|
Mounting Method |
Surface mounting or built-in mounting |
|||
|
Open Width |
700-2000mm |
650-2000mm |
750-2000mm |
650-2000mm |
|
Power Supply |
AC 220v ± 10%, 50-60 Hz |
|||
|
Opening Speed |
300-500mm/s (adjustable) |
|||
|
Closing Speed |
250-550mm/s (adjustable) |
|||
|
Creep speed |
30-100mm/s (adjustable) |
|||
|
Hold-open time |
0.5-20s (adjustable) |
|||
|
Airproof Force (Max.) |
>70N |
|||
|
Manual Pushing Force |
<100N |
|||
|
Electronic Lock Force |
>800N |
|||
|
Power consumption |
150W |
|||
|
Ambient temperature |
-20+50 C |
|||
Technical Details:
(1) Rubber lining sealing technology combined with V groove on the guide rail enables the door completely sealed when the door closed;
(2)Special door body location technology. Semicircular surface beam on the ground matches with the V style groove at the bottom of door leaf, which stop the door from swing and make sure it moves stable and smooth;
(3) The door body decorated with matte stainless steel or spray surface, and on the middle and both sides with sealing stripes to ensure the hermetic effect.
(4)Feet sensor switch applied to avoid contagion;
Stainless Steel Sliding Door,Stainless Steel Bypass Sliding Door,Stainless Steel Interior Sliding Door,Stainless Steel Folding Sliding Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfgaragedoor.com