The current trend of machine tools is high speed, high precision and high quality. High-speed operation requires more and more surface treatment of molds, cutting tools, and mechanical parts. Extending the service life, reducing production costs, and creating higher profits are the common goals pursued by the industry.
The number of ceramic hard films developed by PVD technology is increasing, including titanium nitride, titanium carbonitride, titanium carbide, aluminum oxide, diamond-like films, and titanium aluminum nitride. Such ceramic dura mater is currently applied to a tool or a mold, which not only improves the wear resistance of the tool surface, but also does not lose the toughness of the metal substrate. With the recent breakthrough in machine tool technology, cutting has been speeding up to shorten the cutting time and improve the surface precision of the workpiece.
In order to cope with high-speed machining and save a lot of processing time and cost, tool improvement has become an important factor. Tungsten carbide tools are increasingly used in the tool market due to their high wear resistance and hardness. Luo Baihui, head of the International Association of Mould & Hardware Plastics Industry Suppliers, pointed out that in order to obtain the best benefits during processing, proper surface treatment must be selected. Medium and heavy-duty molds must be CVD high-temperature titanium, supplemented by precision vacuum heat treatment to achieve acceptable The amount of deformation. This part is often used for cold forging dies, hydraulic drawing dies, tungsten carbide drawing lines, and suction pipes. In the application of tools, molds and mechanical parts with medium, low load or high precision requirements, it is appropriate to use low temperature (150 ° C ~ 500 ° C) PVD titanium plating.
Aluminum nitride having a high aluminum content easily forms alumina on the surface of the hard film. This layer of oxide film can make the aluminum oxide titanium ceramic hard film have an oxidation resistance temperature of 923 degrees Celsius, which can protect the edge of the tungsten carbide tool from high oxidation resistance and maintain high temperature hardness. However, although titanium nitride and titanium carbonitride also form a titanium oxide film at a high temperature, they do not easily adhere to the hard film and peel off with the chips, so that the hard film lacks protection, rapid oxidation, and deterioration. Therefore, regardless of the surface treatment of high-temperature or low-temperature coating, it is necessary to select an appropriate substrate and a stable heat treatment, supplemented by pre-treatment of surface fine grinding and polishing, in order to improve.
Concerned about surprises
Tag: Mold Cutting tool Machine tool
Previous: Qinghai CNC machine tool technology has reached the international advanced level Next: High-speed machining process and optimization of mold processing
Compared with the obsolete HPS,MH,HID,LED Vegetation Lights specific wavelengths that plants need in their photosynthesis,as led cost 50% less electricity but output higher PAR which receive warmly welcome from growers and gardeners,furthermore,as led Grow Light dissipate less heat during the illumination process,thus growers and gardeners don't have to install other cooling facilities to solve the overheating problems,which in turn save you much budget on plants growing project.
Philizon have over 6 years' experience in designing and manufacturing LED Vegetation Lights. Persuiting to offer the best grow lights for plants growth,we cooperate with the scientific research institutes and the Academies of Agricultural Sciences in USA, Australia Canada, UK and so on.A great number of commercial plant growers test the lights, and their feedbacks show that this lamp owns a lot of 640nm,660nm and 740nm lights, which gives the plants enough nutrient in the flowering and fruiting phase and bring a far higher yield than other LED Vegetation Lights in the market.
Full Spectrum LED Vegetation Lights and High PAR are good for growth Plants
Item Display
Advantages
Plug with listed certificate safe to use.
Ageing Test
Application
Ideal for all phases of plant growth, and works well with water solution culture and soil culture. Can be used in house garden, pot culture, sowing, breeding farm, flower exhibition, bonsai garden, green house, sowing farm, greenhouse cultivation, water soluble breeding, pipeline cultivation and so on.
Our Quality Control systems and after-sales
Package
Warnings:
1.lndoor use only.
2.To avoid being damaged,do not use water or drip irrigation while using.
3.Sunshine lighting time should be 12-18 hours.
4.While irradiating the plants,the height of led grow lamp is not less than 10 inches,
low height will cause the destruction of plants.
5.Highly hang the lamp will weaken the energy and affect the growth cycle of the
plants, so the lamp should not be hung too high.
6.While taking care of the plants, please spray the leaves and branches 2-3 times everyday,
to ensure the the plants do not wrinkle a wither, and have no phenomenon of few fruit, and
hard pericarp.
Our Advantages
Professional: we are professional LED Vegetation Lights and LED Aquarium Light manufactuer here in China, you will get Professional and High quality LED Vegetation Lights and LED aquarium lighting from us and get good guarantee.
Cost-effective Price: we don`t have the lowest price, but the LED Vegetation Lights and Aquarium Light you get from us really cost-effective, good quality & decent price.
Win-win situation: Long term business is our mission, we think you will agree with us if you are running a business, so we will provide good led aquarium grow lights and warming service to build a long-term business relationship with you
24/7 unlimted customer service: we are always here for you for your question, any question just email us or call us, we will do our best to help you all the way.
Long term warranty: Don`t worry about the quality and we guarantee you 3years warranty for all the LED Vegetation Lights and coral reef led aquarium light..
Best buying experience: you will get the tiptop serive you have ever had,just have a try and you`ll see.
Trade Terms
Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)
Sample will be delivered within 7 working days.
Discounts are offered based on order quanlityes.
MOQ:sample order are acceptable
Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.
Warmly welcome to take a visit on our factory at any time and we can pick you up as you request.
High PAR Output Grow Light,Hydroponics Led Grow Light,Led Grow Light For Plants,Led Grow Light For Greenhouse
Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumlight.com