I was excited to be able to introduce the first precise modular boring system to deliver coolant directly to the cutting edge, even though the position of the radially moving toolholder did not affect the flow of the coolant. Dave Hartman (Plaques - vice president, responsible for the design and development of tool products) said.
Precision boring tool Features 1: Precision boring head has a precision dial with a minimum scale of 2 (diameter); 2: with an inner coolant pilot hole to allow the coolant to reach the cutting edge directly; 3: changeable with a longer tool holder A fine boring head boring range.
In the double-edged rough boring system, it is extremely influential that the double-edged tool holder can achieve 4 times the metal removal rate compared with a single cutting edge, and setting two tool holders can satisfy balanced cutting and level difference cutting. Each tool holder is equipped with a height and diameter adjustment device that allows different cutting methods to be implemented simply and quickly.
Dave Hartman said: Our new double-edged rough boring system currently exceeds industry standards in terms of speed and balance, which is a very cost-effective product for users, and users can easily and quickly obtain a precise diameter.
PALEK's new large-bore boring system with counterweight design features - reduces the overall tool weight and coolant directly to the edge of the cutting edge with height and diameter adjustments. This system can be fitted with ISO standard inserts, as well as balanced and stepped cuts, by adjusting the position of the two toolholders as described above for the double edge roughing system. In addition, the large-diameter boring system also provides extended sliders and heightening blocks to truly implement a modular large-diameter file system.
The small-diameter boring system facilitated the formation of Palac's precise modular system production line. It enables the hole to run at high speed without vibration and can reach 15,000 RPM. Boring ranges from 0.078 to 1.890 (2mm-48mm), and can be adjusted to 0.0001 (.002mm) in diameter. Under the premise of satisfying the rigidity of the tool and machining conditions of the workpiece, the small-diameter boring bar can be adjusted up and down in the fine boring head to meet different processing depths. When the mast is locked and released internally, the toolholder position will not be displaced, eliminating system setup errors. All boring bars and boring heads have internal cooling holes and are pre-balanced by design. The system is equipped with an metric dial, the whole system consists of a dynamic balance small diameter fine boring head, a series of boring bar, boring heads, adapters and wrenches. All components of this modular system are packaged in A lightweight and sturdy suitcase, with a detailed balance of operation instructions.
This new boring system explains? Palec has always been committed to continuously improving the level of manufacturing of its customers. "Placec's president, Michael Nuccitelli, faithfully stated that we believe that the improved part of the product will be welcomed by manufacturers and the industry.
All products will be on display at the International Manufacturing Technology Show in Chicago on September 10th to 15th. Our booth number is W-2300.
One of the most fascinating materials of our time is polycrystalline cubic boron nitride PCBN - the second hardest material after diamond. At CeramTec, PCBN is used as a cutting material from which indexable inserts are manufactured for machining.
PCBN is produced synthetically and is a "composite material" made of cubic boron nitride and a mostly ceramic binder phase. The ratio of cBN to binder content and the cBN grain size determine the application.
PCBN cutting materials are used in the machining of hard and/or highly abrasive workpiece materials. The high hardness and the extremely high hot hardness (up to temperatures above 1,000°C), the edge stability and inertness towards ferrous materials as well as the basically good chemical resistance give CBN cutting materials a high potential for use in machining. On the cutting material side, a distinction is made between high- and low-cBN cutting material grades.
PCBN (Polycrystalline Cubic Boron Nitride) blanks for cutting tools are composite ultrahard materials sintered by polycrystalline CBN and carbide alloy under ultra-high pressure and high temperature conditions. They combine the hardness, wear resistance, and thermal stability of CBN with the impact resistance and toughness of carbide alloy. PCBN blanks are highly suitable for cutting ferrous and non-ferrous metals with high hardness.
PCBN Composites and Inserts
Hans Super Abrasive Diamond Tool Co.,Ltd , https://www.hansuperabrasive.com