Summer is a sad season for many wooden items in the home. In the case of wooden doors, in the summer, wooden doors are prone to different degrees of cracking, deformation and peeling paint and other "heatstroke" phenomenon. It is reported that this is due to the uneven density of wood during the growth of natural wood. With the change of climate during use, and some inferior sealant can not effectively isolate the air into the channel of wood fiber, the wood will be in high humidity. The air absorbs moisture, causing changes in internal and external stresses that cause deformation and cracking.
The expansion coefficient of wood products will be more obvious when the temperature is high. Consumers can prevent their "heatstroke" by performing some simple maintenance on the wooden door. For example, use protective wax or special cleaning agent to evenly spread on the surface of the wooden door, then gently wipe to keep it shiny and moisture-proof. In hot weather, try not to use the cloth with water directly to clean it, at the corner of the house. Dehumidification kits, activated carbon and other dehumidification supplies are available. In addition, it is necessary to remove the humidity in the room in time, often using ventilation fans and ventilators to ventilate and ventilate. Indoor plants can be placed on the balcony or living room, not near the door, so as not to leak water during watering, causing the floor to be like a wooden floor. When foaming, the wooden door cannot be closed.
Wooden door consumers need to pay attention to the following points when carrying out the maintenance of wooden door finish:
1. When removing the stain on the surface of the wooden door, wipe it with a soft cotton cloth. It is easy to scratch the surface with a hard cloth. When the stain is too heavy, use a neutral detergent, toothpaste or furniture-specific cleaning agent to remove the stain and then dry it.
2. Note that cloth that has been immersed in neutral reagents or has moisture should not be placed on the surface of the wooden door for a long time, otherwise it will immerse the surface and discolor or peel the surface finish material.
3, pay attention to the corners of the wooden door, do not rub too much, otherwise it will cause the angular paint to fall off.
4, hinges, locks frequently moving parts, when loose, should be tightened immediately, the sound of the hinge position should be timely oil injection, when the lock is not flexible, you can add the appropriate amount of pencil core foam to the keyhole, do not just fill the oil.
Industry experts have introduced the following properties:
The first is the performance of construction, mainly including color and transparency; leveling; viscosity; fine reading; solid content; drying time; hiding power; storage stability.
Followed by protective properties, including adhesion, hardness, flexibility, impact strength, liquid resistance, temperature resistance, cold resistance. Adhesion: The ability to bond strongly between the coating and the surface of the substrate or between the coatings; Hardness: Used to protect the application during rubbing and impact. Excellent: easy to brittle; flexibility: the ability of the film to restore its original shape after stress relief; liquid resistance: the performance of the film does not change when subjected to various liquids; temperature resistance: the film is subjected to quenching and heating temperature The performance of the mutation; cold resistance: the stability of the paint film when it is subjected to freezing.
Finally, the decorative effect, gloss and gloss retention; color and color retention; varnish transparency. Paint film gloss: The property of light reflected in one direction when the surface of the film is exposed to light. Spraying is better than brushing, and wiping is better than brushing; color: the color should be pure and vivid.
Led Area Light,200W Led Area Light,Led High Area Light,Dlc Area Lights
Fuonce-Lighting , https://www.fuoncelighting.com