Product Description:
Foam Gun
Foam gun is the foaming agent used in doors and Windows caulking and sealing tools.| Name | Foam Gun |
| Material | metal |
| Qty/Ctn | 20pcs/ctn or as the customer required |
| Packing way | regular packaging or as the customer required |
| Port of shipment | Ningbo/Shanghai |
| Delivery time | 10-20days after order confirmed |
We are china zhejiang trumki company, the professional exporter with enough experience!
Professional tools factory here now.
OEM and ODM One-stop service Customized, happy send sample to you confirm quality.
Good products
Good service              -----------------------------------------------    Three good committed to us to do better!!!
Good after-sales service
How to use:
1.Before use: shake the foam tank up and down for 1 minute.
2. Screw the can into the adapter (do not tighten it too tight!).
3. When the injector starts to work, press down the plate machine and let the foam flow for 10 seconds.
The foam is filled into the elongated tube. Drive out residual air.
4. Fix the needle on the nozzle.
5. When the flow control device is new, the syringe with pot should be kept upright.
6. The foam output is adjusted by the board machine and controlled by flow adjustment screw. If the adjustment screw is tightened,
Do not turn the syringe board machine more than three times to loosen the adjustment screw when it is locked.
7. Try to shake the new can when replacing it and remove the empty one.
Quickly (within a minute) install the new structure foam tank.
8. The tank must be changed quickly to prevent foam hardening in the adapter.
9. Replace the needle that makes the hardened foam caking when necessary.
10. When cleaning the foam gun, quickly remove the material tank. Turn the cleaning agent upside down to
Foam gun adaptor on the buckle plate machine for thorough cleaning.
11. Foam hardened residues on the front mouth of the foam gun shall be removed with the pie or similar substances.
Use a metal brush or knife to remove the outside of the long pipe
Announcements:
1.Slow down when you remove the can
2. Do not repair the syringe by yourself or damage the syringe/syringe
3. Do not use hard material to clear adapters
Detailed Images:
Warm prompt:All the above data are manually measured and there may be errors.Specific in kind prevail.
Other product:
Type of shipping:
Order Process:
Check below for more information on placing an order:
2.Confirm the sample, price, lead time, artwork, payment term etc.
3.Our sales send the Performa Invoice with our seal, or you order online to us
4.Customer sign the PI back and arrange the deposit for the order, then send us Bank receipt.
5.Initial Production Stage: Inform the clients that we have got the payment and arrange the production & inform the estimated time.
6.Middle Production: send photos to show the production line which you can see your products . Confirm the estimated delivery time again.
7.End Production: Mass production products photos and samples will send to you for approval.Â
8.Clients make payment for balance and Ship goods , Inform the tracking number and check the status for clients
9.Order can be say "finish" when you receive the goods and satisfy with them
10.Feedback to our about quality, Service, Market Feedback & Suggestion. And we can do better
FAQ:
1.Can we use our own logo design?
& Yes, you can.Please send your request to our sales staff and specify the effect you want.
2.How long is the sample lead time?
& For existing samples, it takes 2-3 days. Most of them are free. If you want your own designs, it takes 7-10 days , subject to your designs whether they need new MOLD, etc. Anyway, we will response fast to your requests.
3.When is the delivery time?
& We will arrange production after the customer makes payment, and the production cycle of the minimum order quantity is 15 days. The specific time will be decided according to the customer's order quantity.
4.What is your payment term?
& Normally we accept payment term as T/T 30% deposit after order signed, and 70% balance against the copy of B/L.
5.Do you have stock?
& Yes, we have a small quantity in stock.
6.How many colors are available?
& You just send us the pantone color code you need, we will match the color accordingly or we will recommend some popular colors for your kindly reference.
7.Can we use our own packing design?
& Yes, you can.
8.Can we use our own shipping agent?
& Yes, you can.
9.Will you check the products before delivery?
& We are 100% new products. We will check the quality before shipment.
10.Your port of shipment?
& Ningbo port, shanghai port, or other china ports.
11.How can I arrive your factory?
& Our factory address is: yongkang city, zhejiang province,China. Yiwu airport is the nearest airport. Or you can come by high speed rail to Yongkang directly. We warmly welcome clients to come to our factory for visit and cooperation.
Contact us:
Â
Product Description:
Foam Gun
Foam gun is the foaming agent used in doors and Windows caulking and sealing tools.| Name | Foam Gun |
| Material | metal |
| Qty/Ctn | 20pcs/ctn or as the customer required |
| Packing way | regular packaging or as the customer required |
| Port of shipment | Ningbo/Shanghai |
| Delivery time | 10-20days after order confirmed |
We are china zhejiang trumki company, the professional exporter with enough experience!
Professional tools factory here now.
OEM and ODM One-stop service Customized, happy send sample to you confirm quality.
Good products
Good service              -----------------------------------------------    Three good committed to us to do better!!!
Good after-sales service
How to use:
1.Before use: shake the foam tank up and down for 1 minute.
2. Screw the can into the adapter (do not tighten it too tight!).
3. When the injector starts to work, press down the plate machine and let the foam flow for 10 seconds.
The foam is filled into the elongated tube. Drive out residual air.
4. Fix the needle on the nozzle.
5. When the flow control device is new, the syringe with pot should be kept upright.
6. The foam output is adjusted by the board machine and controlled by flow adjustment screw. If the adjustment screw is tightened,
Do not turn the syringe board machine more than three times to loosen the adjustment screw when it is locked.
7. Try to shake the new can when replacing it and remove the empty one.
Quickly (within a minute) install the new structure foam tank.
8. The tank must be changed quickly to prevent foam hardening in the adapter.
9. Replace the needle that makes the hardened foam caking when necessary.
10. When cleaning the foam gun, quickly remove the material tank. Turn the cleaning agent upside down to
Foam gun adaptor on the buckle plate machine for thorough cleaning.
11. Foam hardened residues on the front mouth of the foam gun shall be removed with the pie or similar substances.
Use a metal brush or knife to remove the outside of the long pipe
Announcements:
1.Slow down when you remove the can
2. Do not repair the syringe by yourself or damage the syringe/syringe
3. Do not use hard material to clear adapters
Detailed Images:
Warm prompt:All the above data are manually measured and there may be errors.Specific in kind prevail.
Other product:
Type of shipping:
Order Process:
Check below for more information on placing an order:
2.Confirm the sample, price, lead time, artwork, payment term etc.
3.Our sales send the Performa Invoice with our seal, or you order online to us
4.Customer sign the PI back and arrange the deposit for the order, then send us Bank receipt.
5.Initial Production Stage: Inform the clients that we have got the payment and arrange the production & inform the estimated time.
6.Middle Production: send photos to show the production line which you can see your products . Confirm the estimated delivery time again.
7.End Production: Mass production products photos and samples will send to you for approval.Â
8.Clients make payment for balance and Ship goods , Inform the tracking number and check the status for clients
9.Order can be say "finish" when you receive the goods and satisfy with them
10.Feedback to our about quality, Service, Market Feedback & Suggestion. And we can do better
FAQ:
1.Can we use our own logo design?
& Yes, you can.Please send your request to our sales staff and specify the effect you want.
2.How long is the sample lead time?
& For existing samples, it takes 2-3 days. Most of them are free. If you want your own designs, it takes 7-10 days , subject to your designs whether they need new MOLD, etc. Anyway, we will response fast to your requests.
3.When is the delivery time?
& We will arrange production after the customer makes payment, and the production cycle of the minimum order quantity is 15 days. The specific time will be decided according to the customer's order quantity.
4.What is your payment term?
& Normally we accept payment term as T/T 30% deposit after order signed, and 70% balance against the copy of B/L.
5.Do you have stock?
& Yes, we have a small quantity in stock.
6.How many colors are available?
& You just send us the pantone color code you need, we will match the color accordingly or we will recommend some popular colors for your kindly reference.
7.Can we use our own packing design?
& Yes, you can.
8.Can we use our own shipping agent?
& Yes, you can.
9.Will you check the products before delivery?
& We are 100% new products. We will check the quality before shipment.
10.Your port of shipment?
& Ningbo port, shanghai port, or other china ports.
11.How can I arrive your factory?
& Our factory address is: yongkang city, zhejiang province,China. Yiwu airport is the nearest airport. Or you can come by high speed rail to Yongkang directly. We warmly welcome clients to come to our factory for visit and cooperation.
Contact us:
Â
Advantages of LED Grow Light for Marijuana
Long lifetime
Recommended useful lifetime of 50, 000 hours for LED lights the equivalent of
burning a light for 18 hours A day, 365 days a year for seven years and seven months.
Energy efficient
Save 70~85% on power than HID lighting, no need extra blowers and Air conditioning systems for cooling.
Better for plant growth
Plants can use nearly all of the light emitted from LED Lights.
Only about 35% of the light generated by metal halide lamps is useful for plant growth.
Low heat output
LED lights produce very little heat.thermalelectric separation technology and modular fans can control the generated heat amount to be a very low extent.
Features
Deep penetration : Good lighting penetration , can penetrate to the deep of the plants
Modular Internal Build: Fully upgradable, easy warranties
Thermal Management: Custom copper core heatsinks quickly dissipates heat for cool operating temperatures
Powerful: 2nd Generation ultra penetration 5W LEDs light deep into the canopy
Versatile: Power cord available in 85~265V and international plugs
Lighter weight: Much lighter than the same products in the marketplace, safer for hanging .
Plants: Suitable for both vegetative phrase and flowering phrase
Item Display
What is Full spectrum led chip ?
It is the newest trend for indoor plants. Advanced LED Grow Lights chip,not provide sigle color ,provide broad spectrum 400nm~840nm,simialr with sun light ,but most is red and blue,it is best for plant grow.This is a revolutionary step for Grow light which have previously been unable to act as the sole light source for the indoor garden.Suitable for all stages of plant growth.
Advtanges:
Upgraded Epistar chips,High Lumen,High penetration.
Plug with listed certificate safe to use.
The Plug you can choose
Ageing Test
Our Quality Control systems
Package
Application: Greenhouse, Hydroponics, Aeroponics, Home Garden, Farm, Vegetable Shed, Botanic Garden, Flower Exhibitions, Horticulture, Hydroponics, Hemp Cultivations , Medical Plants Cultivations, etc.
Warnings:
1.lndoor use only.
2.To avoid being damaged,do not use water or drip irrigation while using.
3.Sunshine lighting time should be 12-18 hours.
4.While irradiating the plants,the height of led grow lamp is not less than 10 inches,
low height will cause the destruction of plants.
5.Highly hang the lamp will weaken the energy and affect the growth cycle of the
plants, so the lamp should not be hung too high.
6.While taking care of the plants, please spray the leaves and branches 2-3 times everyday,
to ensure the the plants do not wrinkle a wither, and have no phenomenon of few fruit, and
hard pericarp.
Our Company
Trade Terms
Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)
Sample will be delivered within 7 working days.
Discounts are offered based on order quanlityes.
MOQ:sample order are acceptable
Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.
Professional dedicated to Research, Development, Design, Manufacture of Innovative, Intelligent control and high efficiency LED grow lighting for modern agriculture,Marijuana,greenhouse,hydroponics, etc.
Large Capacity Led Grow Light,Led Grow Light For Plant Growing,Led Plant Grow Light,Cob Led Plant Grow Light
Shenzhen Phlizon Technology Co.,Ltd. , https://www.philizon.com