Super compressive, can withstand 5 tons of weight

The main casing is made of A356 high-strength pressure-resistant aluminum alloy, which will never rust. The thinnest part of the main casing is 5 mm, and the thickest place is 1 cm. The actual test of the 5 ton Chinese car filled with cargo is crushed and intact. The link part of the arm and the main body is die-casted with zinc alloy, and the protection arm will not be damaged when subjected to high-strength external force.

5 tons of trucks filled with cargo for compression test

Measured: main case thickness 5 mm

Schwart parking lock nine leading technology two

PA66 special grade nylon plus tempered fiber baffle

The swing arm baffle is made of PA66 special grade nylon and tempered fiber. This material is a kind of material specially designed for high-end products (such as: automobile bumper). It has excellent impact resistance, wear resistance, toughness and mechanical strength. Compressive, anti-corrosive, anti-oxidation, anti-deformation and so on.
Abandon the metal baffle material (such as iron plate), when the car intentionally or unintentionally crushed to the sides of the baffle, it will cause the edge of the metal baffle to be deformed.



Schwart parking lock nine leading technology three

The first and only IP68-certified parking lock, perfect dust and water resistant design

The leading full-closed design adopts German UKS seal ring and skeleton oil seal, IP dustproof and waterproof grade 68 (note: the highest level), which can be completely immersed in water for a long time.
Schwarde parking lock is the only manufacturer of all the parking lock manufacturers on the market that can achieve the highest level of waterproof and dustproof level of the parking lock - IP68 grade, and has passed the Chinese test certification.
First, Schwart parking spaces are striving for excellence in quality and responsible for consumers;
Second, because the working environment of the parking lock is in the underground garage or outdoors, it is exposed to such an environment for a long time. The dust and water vapor ratio are serious. Our products can achieve IP68 level, so that dust and moisture can not enter the host. The inside of the box fully guarantees that the key components such as the motor and circuit board are not damaged, and the service life is greatly extended. Otherwise, when water vapor or dust enters the main casing, the circuit board and the chip will be corroded. After the parking lock is used for a period of time, it cannot be used normally, which greatly reduces the service life.
Third, to ensure the realization of IP68-level key components - seal ring and skeleton oil seal, we selected the German UKS brand, with multi-level sealing, sealing effect is good, to ensure that even if the parking lock is soaked in water for a year Normal use.

Schwart parking lock nine leading technology four

High and low temperature resistance, -40 degrees normal operation, adapt to the north and south climate

Japan imported motor and engine oil, through industrial refrigerator measurement, normal use at minus 40 degrees, high temperature up to 60 degrees normal use.
It solves the phenomenon of parking lock failure that may be caused by cold weather in the north.

Schwart parking lock nine leading technology five

Anti-collision design, return to resistance, LED flashes and alarms until resistance disappears

Resist the return, 180 degree anti-collision design, when the arm encounters the strength external force, the arm automatically resets, the LED light flashes, the host sounds an alarm until the resistance disappears, the arm automatically recovers the state before the resistance, and the LED stops flashing. The alarm sound is released. In addition, when the main battery is low, the LED will flash continuously and beep.
The second-generation parking lock (eg X-type) When the remote control fails, or when the owner forgets to unlock, the reverse car hits the parking lock, the car will be damaged, and the parking lock will be damaged. The unique resistance return function of the Schwart parking lock effectively solves this problem.

Schwarde parking locks nine of the leading technology

Use American champion brand battery, use at least one year on one charge

It adopts the American champion Champion brand battery, which has the characteristics of shock resistance, high temperature resistance, small volume and good discharge performance. The theory can be recharged 5000 times. The most power-saving design mode, the host operating current reaches the industry's lowest 0.4A, the starting current is 0.6A~0.7A, and the standby current is 0.6mA, thus ensuring that the charging is used for at least one year.

Schwart parking lock nine of the leading technology

Ultra long-distance remote control, up to 60 meters

Schwart remote control parking lock iron special external wireless signal receiving enhanced design, ultra long-distance (60 meters) remote control with its own learning function, if you have a remote control failure, you can re-learn, no other operations.

Schwarde car position housekeeper nine leading technology eight

Four expansion screws fixed, anti-theft design

The Swarf remote control parking lock is designed with internal anti-theft design. The parking lock is fixed on the ground with four expansion screws, and the position of the expansion screw is installed inside the main casing. Only the key can be used to open the rear cover to eliminate the installation of the parking lock. Hidden dangers of being stolen outdoors.

Schwart parking space housekeeper nine leading technology nine

The machine is die-cast from 18 sets of independent molds, an unparalleled design process

The international design concept is integrally molded by 18 sets of independent molds, which guarantees zero tolerance of each product, and the process and design level are far ahead. At the same time, it is also guaranteed that the Schwart parking lock is difficult to be imitated. It is difficult for small factories to invest so much money to copy.

Aluminum Alloy 2000 Series Bar

Aluminum Alloy 2000 series Bar or Rob  is commonly used for aircraft structural components, truck wheels, medical instruments, and screw machine products.Aluminum 2024 Bar is one of the most widely used aerospace Aluminum Bar with cold finished or extruded aluminum wrought product providing high to moderate strength, very good machinability and weld ability.

1.Dimension: Customized dimension, OEM & ODM

2.Material: A2024 and other series alu alloy        

3.Suface treatment: Anodizing, polishing, turning ,power coating, mill finish etc

4.Equipment: CNC ,extruding machine, cold drawn machine, heating oven, straightening machine, cutting machine  

5.Mechanical Properties

6. STANDARD PACKING:Wooden case/carton
7. Trade Terms

1) Payment: 30% T/T in advance, 70% balance pay before delivery.  L/C at sight.

2) Delivery time: 20 days after deposit receiverd. If opening mould, plus 7-10 days.

3) Trade Term can be chosen depending on your requirements.

4) FOB Port: Shanghai