1. It is usually required that the empty conveyor shall be started to prevent the overload of the motor and the stainless steel chain plate from slipping; before shutdown, all the materials on the stainless steel chain plate shall be completely unloaded except in special circumstances.
2. The starting sequence is to open one conveyor first (after discharging the stainless steel chain plate), and then open it in order, after all, open the receiving conveyor. The shutdown sequence is the opposite of the boot sequence.
3. In the same machine, stainless steel chain plates of different types and specifications must not be used together.
4. The tension of the stainless steel chain plate during operation should not be too large. It should be done under the condition of minimum initial tension under the premise that the transmission gear does not slip and the receiving point does not over-slung.
It can be equipped with a scrolling display that displays 300-500 words of display content. It can also be equipped with intelligent infrared probe anti-collision device, which can automatically return to work when people or foreign objects are 20-30CM, thus ensuring the safety of vehicles and pedestrians.It can automatically open and close when automatic clutch is cut off. Manually open and close when manual clutch is cut off. The control system has control panel, push button switch, and other requirements. Equipped with wireless remote control.The door body is made of high-quality stainless steel and aluminum alloy profiles, and is hinged by the parallelogram principle. The drive is driven by special motor, worm and worm gear deceleration, and has automatic clutch or manual clutch.
Factory Sliding Retractable Gate,Aluminum Alloy School Sliding Gate,Automatic Electric Single Double Gate,Store Retractable Gate
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hffreezerdoor.com