The place where aluminum profiles are processed

【ALUMINIUM NETWORK】Aluminum profiles During the process of casting aluminum rods, the internal chemical composition and microstructure of the aluminum rods are not uniform. At the same time, there are generally residual stresses inside the aluminum rods. In order to eliminate the residual stress of the ingots, the ingots are eliminated. Non-uniform chemical compositions and textures, which in turn improves the processability of the ingot and some of the final properties of the product, must be uniformly treated. The homogenization of the ingot is in the homogeneous furnace. get on.

The loading and unloading of the homogenizing furnace is accomplished through the use of a composite three-dimensional material train. The compound three-dimensional material train can move in the front, rear, left, right, upper and lower directions, and the loading and unloading materials are automatically performed.

The cooling system of the homogenizing furnace is a combination of air-cooling and water-cooling, and aluminum profiles achieve a good cooling effect in a low-cost state.

Round Mixer

Good quality round concealed bath shower mixer with diverter

Round Mixer,Round Pin Sink Mixer,Round Mixer Tap Connector,Stainless Steel Round Mixer

KaiPing HuiPu Shower Metalwork Industrial CO,LTD , https://www.hp-shower.com