In home decoration, the effect of wall decoration directly determines the overall appearance of the interior. In many families, they like to use paint to add luster to the wall. However, in order to ensure the quality of the decoration, there are many needs for the paint coating in the construction process. Note that the following small series specifically for everyone to share the relevant content of the wall decoration paint .
Wall decoration paint
1, interior wall paint
The inner wall refers to the wall surrounded by the outer wall. The main function of the interior wall paint is to decorate and protect the walls so that they are beautiful and clean and create a comfortable living atmosphere.
When consumers purchase interior wall paints, they must first pay attention to them. Compared with exterior wall paints, they have a direct impact on people's health, so the environmental protection requirements are even higher. Second, the coating of the interior wall paint should be delicate, the hiding power should be better, and the color should be more abundant. In addition, defects in interior wall finishes are easily exposed, which requires a better appearance of the paint and no sagging.
At present, the main interior wall paints on the market are as follows:
Interior latex paint: water as a dispersion medium, does not pollute the environment, safe and harmless, is an environmentally friendly coating;
Water-soluble interior wall paint: With water-soluble polymer as base material, it can save a lot of resources and reduce air pollution;
Colorful interior wall paint: One spray can achieve colorful effects, but it contains organic solvents and is polluted to the environment.
2, exterior wall paint
It refers to the walls that are arranged along the edges of the building. Because it needs to directly face climate change, it is subject to sun and rain, alternating freeze-thaw cycles, dry and wet changes, and harmful material erosion and air pollution. Therefore, the external wall paint must have certain properties to maintain long-term protection and Decorative effect.
In general, the wall paint chosen for the exterior wall has the advantages of water resistance, light resistance, color retention, anti-pollution, anti-aging, and good adhesion, and also has good freeze/thaw resistance and low film formation temperature. . When consumers buy exterior wall paint, they need to consider these aspects.
At present, there are several types of exterior wall paint on the market:
Exterior latex paint: water as a dispersion medium, does not pollute the environment, safe and harmless, is an environmentally friendly coating;
Flexible architectural coatings: Effectively cover cracks and protect and decorate walls;
Solvent-based exterior wall coatings: denser coating, better hardness, gloss, water resistance, weather resistance, and stain resistance;
Sand wall building exterior paint: strong three-dimensional, thick coating, good weather resistance, but poor stain resistance.
3, bedroom and living room wall paint
The paint on the walls of the bedroom and living room requires strong adhesion, fine texture, good resistance to differentiation and breathability. When consumers purchase, they can choose to have a wall paint with fireproof, mildew-proof, antifouling, and easy-scrubbing properties.
4, kitchen and bathroom wall paint
Due to the relatively heavy oil in the kitchen and bathroom areas, the wall paints in these two areas should have good resistance to aging, stain resistance, water resistance, color retention and strong adhesion.
The above is the introduction of the relevant content of the wall decoration paint, I hope to help you. For more information on wall paint, please continue to pay attention to this site information.
Balcony wall decoration wall decoration diatom mud home decoration partition wall decoration design wall paint decoration wall
About high speed Door Accessories:
1.Driving system: High Speed Door Servo System motor and control, motor SNMA / SEJ +reducer+flang+encoder+control box
2.Other accessories: Middle aluminium bar, bottom aluminium bar, aluminium vertical track, stainless steel vertical track, brushes,round nylon strip, PVC roll, rolling steel tube complete, drum be;;s for rolling tube, side end covers, stainless steel cover, steel tubes, air bag sensor system, safety light beam, Microwave sensor 24 Gigahertz,PVC welding machine, smoke and fire sensors, PVC transparent window, magnetic loop, photocell, remote control, manual push button, sound warning alarm Led lamp traffic light
For some main accessories, here is detain introduction:
1).24G radar sensor:
Brand: Hofic
Technology: Microwave processor
Maintain time: 0.5s
Protection: IP54
Transmitting frequency: 24.125GHz
Maximum installation height: <5meter
Transmitting power density: <5mw/cm2
Power consumption: <1W(VA)
Installation angle: 0-90°(lengthways) -30-30°(crosswise)
Supply voltage: AC&DC 12V-30V
2).Photocell:
Approval CE & ISO9001
Power supply AC/DC 12-30V
Static current 25A
Action current 40mA
Mounting distance Max 10m
NO or NC contact Done by NO./NC. contact selection
Working environment temperature -42℃ to +45℃
Working environment humidity 10 to 90%RH
Appearance dimensions( controller) 123*50*32mm(L*W*H)
Appearance dimensions(Magic eye head) 19*13mm(L*D)
3). Remote control
Operating Voltage: AC220V/50HZ+-20%
Transmit power:≤100mW;Super regenerative module, strong anti-interference
Operating temperature:-30℃-+70℃
Working frequency: 433MHZ;transmitter 1527, millions of encoding chip
Accept sensitivity:≤110dB
Manipulation method: electric remote control
Configure the quantity: Wireless number; factory configuration transmitter two. Can be equipped with PT2272 digital decoder chip
Configure the function: Up, down, stop, anti-lock full-featured reproduction
4). Magnetic loop
Voltage: 12V AC/DC +-10% 24V 115V AC+-10% 230V
Power: <2VA
Continued electrical output: 7A / 250V AC
Frequency range: 20 to 200K Hz
Response time: infinity (factory setting) or adjust maintain time
Sensitivity: 0.01% to 0.1% divided into 3 levels
Protection level: IP30
Electromagnetic compatibility (EMC) Complies with EM50081-1 and EN50082-2
Detection loop inductance: the limit of 40uH to 100uH ideal value 80uH to 300uH
Operating temperature: -25 ℃ to 70 ℃
Storage temperature: -40 ℃ to 85 ℃
Relative humidity: <90% non-condensing
Temperature compensation: automatic compensation up to 50 ℃ / h
Connection type: 11 pin DIN rail socket
Dimensions: 41 * 78 * 85 mm (width * height * length)
Weight: 250 grams
5). manual push button
This exit switch button is made of ABS and has built-in indicator light make it looks more elegant and fashionbale. It can be widely used in public entrance gates, public door, home, office, hotel, etc.
Door Exit Button Push To Exit Switch Door Opener For Access Control Security
Main Feature
Fashionable appearance
Made of ABS Plastic
Easy to install and operate
Used for access control
Specification
Mechanical Life: 500,000 test
Material: Plastic
6). Limit switch encoder
Voltage: DC5V-24V
Output voltage: high voltage≥85%Vcc, low voltage≤0.5V
Maximum mechanical speed:6000rpm
Anti-vibration: 50m/s,10-200HZ,XYZeach way 2 times.
Current consumption:≤30mA
Response frequency: 0-100KHZ
Protection: waterproof,oil proof,dust prevention, IP54
The output code system: binary code
Operating life: MTBF≥30000(+25℃,2000rpm)
Rotational inertia:4.0x10-8kgm²
Maximum load:radial direction20N
Axial direction:10N
Weight: about 0.4kg
High Speed Door Accessories,High Speed Door,Electronic High Speed Door Accessories
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.selfrepairinghighspeeddoor.com