Tile peeling occurs in many families. The cause of this phenomenon may be that the construction is not in place, or it may be caused by the poor cement and glue application. However, whatever the reason, the loss of tiles will affect the beauty of the home and give us safety. Bring hidden dangers. What is the stain on the wall tiles ? What are the considerations for tile paving? Let's take a look with Xiaobian.
First, the wall tiles off what touched
1. Tiles only fall off: Scrape all the mortar on the tile, then add proper amount of adhesive to the cement and stir them into a paste. Then spread these paste-like cement thinly on the back of the tile and stick it to the place where the original tile fell off. 
2. Tiles and mortar fall off at the same time: firstly cut some small pits from the fallen areas, and then re-embed the mortar made by mixing the all-purpose cement, then press the tile firmly on the wall, wait until the mortar is hardened, then handle it. Take it off.
Second, tile paving matters needing attention
1. Tiles soaked with water on demand: What did the friends learn by using the above description of what the tiles were missing on the wall? At this time, no matter what method you use to paste the tiles, it is very troublesome, so we should pay special attention when we tiling. For example, tiles must be soaked before being tiled, but the tiles must be soaked according to the worker's construction schedule, because the tile manufacturers or merchants are not returning.
2. Before the tiles are tiled, make a brick plan: Before laying the tiles, you must make a plan for paving bricks. This not only avoids the unexpected situation in which the paving was removed due to inconsistent proportions. It also saves unnecessary wear and tear. 
3. Properly allocate the mixing ratio of cement sand: Because the cement mortar easily swells, it is easy to squeeze the tiles after laying, so the proportion of cement sand should be well controlled. If it is a wall tile, the ratio of cement sand is preferably 1:3 and the floor tile is 1:2.
4. The seams of the tiles can't be too small: Because the tiles will be affected by the weather, the tiles will expand and contract after the thermal expansion and contraction of the glaze, so we can't make the seams of the tiles too small during construction. The supplier consultation needs to leave a lot of gaps. 
5. Better caulking and other tiles dry before: Tile joints must be allowed to dry before the tile can be carried out, if you immediately make the tiles easily slack, it will cause the tile after long-term use after the phenomenon of shedding At the same time, it also left us with a safety hazard.
Editing summary: The above is related to what the wall tiles have been used to remove and what to do with the tiles. I hope to help my friends. If you need to learn more about ceramic tile, you can always pay attention to us and the following article will be more exciting.
Flag Hinges ,Upvc Door Flag Hinges,Adjusting Flag Hinges,Upvc Door Hinge
Jiaxing Gates Hardware Products Co.,Ltd , https://www.888gates.com