Most people nowadays have floors in their homes. Waxing the floor can not only decontaminate the stains, increase the appearance, but also prevent insects, moisture, cracks, and extend the life of the floor. Then, what are the methods of floor cleaning and waxing ? Here are the methods for floor cleaning and waxing for Xiaobian.
What are the methods of floor cleaning and waxing?
First of all, we have to choose to clean and wax the floor when the weather is fine. Due to the high humidity during the rainy days, white waxing will occur when waxing, and there will be white spots on the floor afterwards. The phenomenon is that if the room temperature is too low, the floor wax will harden and it will not be easy to operate. So be sure to clean and wax the floor when it's sunny. Then, clean the floor and clean it thoroughly. Clean the floor with a clean mop. Finally, let the ground be fully dry and there should not be a bit of moisture.
What are the methods of floor cleaning and waxing?
After we have prepared our work, we must test the corners of the local area, because it will help determine the best effect of waxing. Thoroughly shake the vessel with floor wax and stir it evenly. Use a special drop of wax to drop into the floor wax. Carefully apply it in different directions of the floor. Be careful not to paint it out or apply it repeatedly. Be sure to apply evenly. Do not drop floor wax on the floor. It is also not possible to dilute the floor wax with water. Special tools are used for the waxing tools. After the floor wax is smeared, let him dry thoroughly and not walk on the floor. If there is a missing coating, it is necessary to make a supplementary coating. When the second coating is applied, it must be performed after the first complete drying.
What are the methods of floor cleaning and waxing?
Due to the different floor types, the way of cleaning and waxing is also different. If the solid wood floor is clean and waxed, it should be waxed within one week after the floor is finished. Washing and waxing the floor is to protect it very well. Therefore, it is best to lay out the wax once every month for the freshly finished solid wood floor, and liquid wax for the first quarter or six months after half a year. Of course, you can also adjust the time afterwards. If it is a solid wood floor for more than five years, a solid floor wax can be used. Liquid wax can be used often when it is normally maintained.
What are the methods of floor cleaning and waxing?
Because solid wood flooring is different from solid wood flooring, we must be especially careful when waxing. Care must be taken to apply sandpaper and detergent during cleaning. Otherwise, the wear-resistant layer on the floor surface will be damaged. If it is a light-colored laminate flooring, you can directly use the home's Taomi Shui, wipe it with a rag directly on the floor, and then wipe it with a dry rag. If it is a dark floor, use an appropriate amount of floor cleaner, but you can't use a strong acid-alkali liquid to clean the laminate floor. Use a small amount of floor cleaner. The method of waxing is the same.
The above is all about the methods of floor cleaning and waxing . I hope to help everyone. If you want to know more relevant knowledge, you can continue to pay attention to the relevant information of this website. Xiao Bian will bring more exciting content for everyone.
General Valve,Oven General Electric Valve,General aluminum Valve,Electric Aluminum Valve,Electronic Ignition Valve,oven electornic aluminum valve
GUOLONG PRECISION VALVE CO.,LTD , https://www.glstovevalve.com