Engraving in classical furniture is the essence of furniture. It is the art of carpenters decorating wooden furniture objects with tools in their hands. Now that machine carving is prevalent, seeing more people can not help but make people feel tired. It is difficult to have the vivid and beautiful hand-carved sculpture. It also shows that hand-carving has an irreplaceable position in furniture carving. How do these beautiful designs pass through the craftsman's hands to the furniture? Let Omido furniture Xiaobian tell you what furniture carving techniques .
Four ways are commonly used in furniture carving
According to the different carving materials, there may be wood carvings, brick carvings, stone carvings, jade carvings, and tooth carvings. The carving of furniture is mainly wood carvings. According to the “Chinese Modern Redwood Furniture†edited by Liu Peng, a research associate of the Institute of Wood Industry of the Chinese Academy of Forestry, modern carvings of mahogany furniture are commonly used in the form of wire carving, relief, openwork and round carving.
Line carving : Generally, it is a method of using a V-shaped triangular knife to make a female line in the plane. The carved pattern or picture is vivid and beautiful, and the lines are smooth and free. Mahogany furniture is also useful in the form of shovel to show the pattern of Yang Xian also known as line carving, such as table teeth is this form.
Relief : It refers to a form of carving that is higher than the bottom of the pattern. It is used most in furniture decoration. According to the level of the pattern, it is divided into deep relief and shallow relief. Among these two kinds, there are insights and missing points, and there are also differences between the land and the Kam land.
Openwork: An engraving method that hollows out the ground to show the overall image of the carving. Some furniture needs to be seen on both sides, known as "two-sided carving," and there is also a carved side that does not carry carvings. The method of hollowing out is to use a fretsaw to pull it out and then sculpt it. It is also possible to "half a half-carving", that is, using a fretsaw to pull the air out partially, and using a chisel to cut it out.
Round sculpture: It is a kind of three-dimensional carving form. It is often used on the ends of the brain with thrones, hangers, and high basins. It is carved into a dragon head or crested head. The claws of the dragonfly's beak, and even all sorts of clips, are all round sculptures.
Mature carving not only requires the craftsman to have a certain amount of wrist power, but also requires a certain amount of painting skills. If a knife is used to move the knife, various types of cutters are used freely, and it is possible to feel the furniture in the process of subtraction. Under the uncanny workman's digging a shovel, they put on new makeup and are given new vitality and charm. Interspersed with various techniques, the craftsman's heart through the furniture to the human heart.
Classical furniture carving art is a display of the beauty of people's labor. It is the soul of furniture. It allows the beauty of art to spread throughout our lives. After learning about the furniture carving techniques , we will discover the art of furniture carving in life. For more information on furniture, please visit the GO Home Information Channel.
Wall sconce is a lighting fixture installed on a wall, usually made of metal, glass, or plastic. They can provide direct or indirect light, used to illuminate a room, hallway, foyer or other indoor space. Wall sconces are typically mounted on walls and can be used in conjunction with ceiling lights or table lamps to provide more lighting options and visual layering. They can also be used for decorative purposes as they come in various shapes, colors, and design styles to match different interior decor styles.
Decorative Wall Sconces,Wall Sconces Indoor,Wall Sconce Modern,Wall Sconce For Living Room
Zhengdong Lighting Co., Ltd. , https://www.zdlightingfixture.com