Many homeowners choose to stay in their new home in the winter. However, many owners are immersed in the happiness of staying in their new home. It is easy to overlook details such as problems and indoor air pollution. Experts remind that winter is a season in which the quality of decoration can be tested. The owner should pay more attention to it.
Problem I: Cracking deformation
The climate in winter is dry. It is easy to crack and deform in winter when used during the decoration of spring, summer and autumn.
Acceptance method: Pay attention to the weight of the finished product. You can knock it and listen to the sound. Observe the walls of the house, the joints where the woodwork is live, and if it is empty.
Question two: whether the joints pay attention to thermal expansion and contraction
Decoration wooden items should pay attention to do left joint processing, should fully consider the principle of thermal expansion and contraction, control the joints of good wood. Due to the low temperature in winter, the sheet is in a contracted state and there will be a certain gap between the boards. If the joints are too tight and tight, the temperature rise in the spring and summer, the expansion of the plate will cause floor, furniture, doors and windows, such as bulging, deformation, or dislocation or even cracking. On the floor of the shop, it is best to leave about 3 mm of expansion joint around.
Acceptance method: The owner can observe the above details in the room. If not, you can negotiate with the decoration company in advance.
Problem 3: Empty drum comes off
Tiles must be soaked before laying. If the water is not saturating when it is treated with water, it will be bonded to the cement due to the water absorption during the slushing process, resulting in emptying and shedding. . In addition, the large temperature difference between indoor and outdoor in winter, will test the wall or the firmness.
Acceptance method: Use a hammer to gently tap the four corners and the middle of the tiles.
Question 4: Is the pipeline smooth?
Whether the pipeline is smooth and comfortable in the home life is closely related. Many of the pipelines are exposed outdoors, and the owners can pay more attention to whether there are problems such as freezing and unblocking.
Acceptance method: Pay attention to the size of the water flow in the faucet and the speed of the water. Flush, speed and flow of water.
Question 5: Pay close attention to indoor air quality
The owner likes to keep warm doors and windows warm in winter. At this time, if unqualified, indoor formaldehyde, benzene and other harmful gases will exceed the standard. Or, in the home where the decoration is completed, the formaldehyde will be released when the room temperature rises with the use of air conditioners and heaters.
Acceptance method: Close the indoor window for 8 hours, pay close attention to whether the body has adverse reactions, and then use a simple tester to self-test, or ask a professional testing agency on-site service.
Bay window decoration entrance decoration interior decoration window home decoration furniture decoration decoration company look good floor tile floor tile
How to Accept Acceptance of Home Improvement Projects
Metal door and window acceptance method
Many homeowners choose to stay in their new home in the winter. However, many owners are immersed in the happiness of staying in their new home. It is easy to overlook details such as problems and indoor air pollution.
Many homeowners choose to stay in their new home in the winter. However, many homeowners are immersed in the happiness of staying in their new home, and they tend to overlook details such as decoration issues and indoor air pollution. Experts remind that winter is a season in which the quality of decoration can be tested. The owner should pay more attention to it.
Home winter decoration acceptance considerations. Staying in a new home in winter should be a very pleasant feeling. However, when many owners are immersed in the happiness of staying in their new home, they often overlook details such as decoration issues and indoor air pollution. Experts remind that the winter season is the best time to test the quality of decoration. Owners should pay more attention to it. Question one: pay attention to the tiles empty tiles off the tiles must be soaked in water before the paving, if the bubble water treatment, the water did not reach saturation, it will be in the stick ...
Home winter decoration acceptance considerations. Staying in a new home in winter should be a very pleasant feeling. However, when many owners are immersed in the happiness of staying in their new home, they often overlook details such as decoration issues and indoor air pollution. Experts remind that the winter season is the best time to test the quality of decoration. Owners should pay more attention to it. Question one: pay attention to the tiles empty tiles off the tiles must be soaked in water before the paving, if the bubble water treatment, the water did not reach saturation ...
Although winter is not a season for decoration, many friends choose to spend the cold winter decoration for a variety of reasons. Due to the low temperature and dry weather in the winter, some decoration rules applied in the Spring and Autumn Period did not work at this time.
submit
Metallographic Cutting Machine
Easy to set up using an intuitive user interface that requires almost no training
The simple user interface and color display make operation very simple. No complicated menu. Use multi-function knob to set parameters, joystick to quickly position the workpiece, and automatically adjust the height of the cutting wheel. Yes, that's it.
The relocation of the workpiece is replaced by automatic X - axis movement
Thanks to optional X-axis movement, a series of cuts can be performed without wasting time repositioning the workpiece. The cutting table can be moved 40 mm, and the user can choose up to four sliders of different thickness.
With the help of a locator laser, the position can be reached on the first attempt
Positioning can be time-consuming, but Secotom uses a positioning laser to point out where to cut, and positioning becomes a breeze. The combination of laser and joystick enables easy positioning.
Cutting in a variety of sizes and shapes with the ultimate flexibility of the movable T-slot cutting table
Secotom's cutting table provides extreme precision and flexibility for a variety of sizes and shapes. Capable of cutting large and deep workpieces (up to 70 mm/2.8 "in diameter or 165 x 50 mm/6.5" x2 "in size). The cutting table is equipped with 8 mm T-groove, and users can choose from a variety of fixtures that are most suitable for their cutting operations and can achieve the highest accuracy of the toola
Metallographic Cutting Machine,Metallurgical Abrasive Cutting Machine,Metallographic Cutter,Metallographic Sample Cutting Machine
TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterials.com