When we calculate the decoration construction cost, the decoration company’s project quotation will have some impact according to the housing situation. The main projects here include:
1. Wall: The flatness of the wall should be measured from three aspects. The solid angle formed between the two walls and the ground or the top surface should be straight. The angle between the two walls should be vertical, and the single wall should be flat and without Fluctuation, no bending. These three aspects are related to the construction unit price of the floor covering and wall decoration.
2, the top surface: The flatness can refer to the ground requirements. Light tests can be used to see if there is a large shadow to clarify its flatness.
3. Doors and Windows: Check whether the horizontal and vertical joints between the door and window fan and the Cabinet are even and dense.
4, kitchen and toilet: pay attention to whether the ground to the direction of Floor Drain; ground water conditions; ground pipe (water and coal, warm water) around.
5. Waterproof: Whether the wall or the top surface has partial cracks, water traces and mildew, whether the sanitary wares have water drips from above and below, whether the sewers are smooth, and whether the existing washbasins, toilets, baths, stoves and other locations are reasonable.
6, the ground: whether it is cement plaster or floor tiles, must pay attention to the flatness, including the single room and the flatness of each room floor. The degree of flatness has a great influence on the price of decoration construction such as paving tiles or flooring.
Decoration start-up preparation decoration budget knowledge experience talk room room housing cement decoration look decoration company okay floor tile
Wood Look Cermaic tile can not only maintain the real wood texture,but also overcome the shortages of real wood.Also it meets people's pursuing quality of life for high-end decoration.150*900mmm Matte finishing wooden texture tiles are available with Yellow,Beige,Grey and Brown color.which can be widely used in interior floor and wall in many palces like living room, dining room, bathroom and balcony and other commercial areas etc.
1. Wood look porcelain tiles are produced by 3D printing technology,which show the real effect of real wood.
2. Have good flatness and lower water absorption (less than 0.5%).
3. Wear-resistant and stain resistance.
Wood ceramic tile,Wood look porcelain tile,Wooden flooring tile,Wooden flooring ceramic tiles,Floor wooden tiles
Foshan Castel IMP&EXP Co.,Ltd , https://www.fscastel.com