Asphalt Rolling Thin Film Oven-Bitumen Rolling Thin Film Oven

Asphalt Rolling Thin Film Oven-Bitumen Rolling Thin Film Oven
Summary:
    This instrument is designed and made as per industrial standard T 0610-2011 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt in JTG E20-2011 Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering. It is suitable to determine mass loss of highway asphalt rolling thin film after heating, and the change of penetration, viscosity, ductility and breaking point of asphalt residue after the thin film has been heated, so as to estimate the aging performance of bitumen.
 
Main technical features:
1. This Oven is composed of electric control component, working oven and mechanical drive. An  
   illuminating light is equipped in the oven for convenient observation. 
2. There is an air compressor in the oven to supply the air needed for the test. The air can be
  controlled by a flowmeter on the panel. 
3. It adopts high precise temperature controller which can meet test requirements.
 
Main technical specifications:
1. Power supply:    AC(220±10%)V, 50Hz
2. Heating power:   2.4kW
3. Working temperature:  163ºC
4. Temperature control precision:    ±0.5ºC
5. Rotating speed of turn plate: (15±0.2) r /min
6. Air flow rate:    (4000±200) mL /min
7. Timing unit:    Alert at 85 min
8. Ambient temperature:    (5~50)ºC
9. Relative humidity:    ≤85%
10. Maximum power consumption:   2.6kW
  

Packing:




Company Information:

      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.



Why choose us?

1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;

 

Asphalt Rolling Thin Film Oven-Bitumen Rolling Thin Film Oven
Summary:
    This instrument is designed and made as per industrial standard T 0610-2011 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt in JTG E20-2011 Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering. It is suitable to determine mass loss of highway asphalt rolling thin film after heating, and the change of penetration, viscosity, ductility and breaking point of asphalt residue after the thin film has been heated, so as to estimate the aging performance of bitumen.
 
Main technical features:
1. This Oven is composed of electric control component, working oven and mechanical drive. An  
   illuminating light is equipped in the oven for convenient observation. 
2. There is an air compressor in the oven to supply the air needed for the test. The air can be
  controlled by a flowmeter on the panel. 
3. It adopts high precise temperature controller which can meet test requirements.
 
Main technical specifications:
1. Power supply:    AC(220±10%)V, 50Hz
2. Heating power:   2.4kW
3. Working temperature:  163ºC
4. Temperature control precision:    ±0.5ºC
5. Rotating speed of turn plate: (15±0.2) r /min
6. Air flow rate:    (4000±200) mL /min
7. Timing unit:    Alert at 85 min
8. Ambient temperature:    (5~50)ºC
9. Relative humidity:    ≤85%
10. Maximum power consumption:   2.6kW
  

Packing:




Company Information:

      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.



Why choose us?

1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;

 

In perfect binding, adhesive alone is used to attach the pages of a book together and attach the book`s cover. 

If only one adhesive application is used to construct the book, it is called a [one-shot process." 

When two adhesive applications are required, it is a [two-shot process."

In the latter process, the first application of adhesive binds the bases of the book together. This adhesive is sometimes referred to as [primer" glue. 

The second application of adhesive is used to attach the book`s cover to the side of the book spine. This adhesive is referred to as the [cover" glue.  

Light Yellow Side Glue has good flexibility and strong adhesion.it can be used to attach the book's cover to the side of the book spine.

Good adhesion,weathering resistance and impact resistance.

Light Yellow Side Glue

Light Yellow Side Glue,Light Yellow Hot Melt Glue,Waterproof Glue,Stronger Glue

Taixing Chaobang Adhesive Co., Ltd. , http://www.cb-adhesive.com