Bang Tai Ya teaches you that solid wood furniture is stable in winter.

Just in the harsh winter, the air becomes relatively dry. For solid wood furniture, the surface of solid wood furniture at this time is the most common problem. How can the solid wood furniture survive the winter? Bangtaiya wakes up consumers, the common problems of solid wood furniture over the winter are surface cracking, furniture deformation, loose structure, etc. In order to make the solid wood furniture smooth in winter, pay attention to the following points.

Surface cracking Surface cracking is generally caused by air drying. Shrinking gaps generally use different methods depending on the size of the gap. If the gap is large, you need to select the same wood strip according to the material of the furniture, and cut the strip into a gap and then stuff it into the gap. If the crack is small, you need to fill in some sawdust and use sandpaper (smooth, then wax). Until the surface of the furniture becomes smooth and flat. The post-sealing method of filling the wood is the same.
If the deformation of the furniture is slightly deformed, this kind of situation is generally used to fight (the machine is leveled, and then sandpaper is used (flat waxing can be used. If the deformation is more severe, then it should be "big move", the deformation part needs to be sprayed with water, Then use a hot air gun to completely heat it here, press a piece of straight and flat wood on top, and fix the ends with the clips so that the surfaces of the two are in full contact, so that the deformed wood is straightened with the fixing plate for one to two days; The deformation is particularly serious, it needs to be repeated 2-3 times. It should be noted that the hardness of the wood used for shaping must be larger than that of the furniture wood. The size of the shaping clip depends on the degree of deformation, and the roasting gun also has liquefied gas and baking lamps. Choice, but the speed caused by the difference in power is not the same. After the deformation is corrected, the latter program is to hit (and wax).
If the structure is loose, if the structure is loose, the furniture must be disassembled. After re-adjusting the assembly, it is best to fix the copper or iron shelf on the surface of the furniture, so that the structure of the furniture will be very firm. .
Maintenance skills

The daily maintenance of solid wood furniture is very important, and sunlight should be avoided during use. For normal maintenance, use a soft cotton cloth, apply a small amount of walnut oil, and wipe repeatedly until the surface of the furniture is dried. It is worth noting that it must not be rubbed with water, otherwise it will easily cause cracking of the furniture surface. Bangtai Yaju needs to remind furniture lovers to carry out daily maintenance, please be sure to ask professional construction personnel, otherwise it will easily cause other "complications", but it will not be worth the candle.

Source: GO Jiaju Furniture Network

Extruder screw barrel

Extruder screw barrel,Pvc Film Blowing Extruder,Single Screw Barrels,Film Extruder

Zhejiang Zhongsu Screw Co., Ltd. , https://www.zhongsuscrew.com