The BRY air-cooled centrifugal heat transfer oil pump is a centrifugal pump that transports high-temperature heat-conducting oil. When the Motor is hot and the trip occurs, the cause should be checked. Generally, there are the following five conditions: 1. The selection of the oil pump is incorrect, and the actual use of the pump is lower than the rated value. Sweeping method: replace the pump, replace the large motor 2, the motor can not reach the rated power. Sweeping method: replace the motor BRY air-cooled centrifugal heat transfer oil pump to cause the five major causes of tripping
The BRY air-cooled centrifugal heat transfer oil pump is a centrifugal pump that transports high-temperature heat-conducting oil. When the motor is hot and the trip occurs, the cause should be checked. There are generally five conditions:
1. The selection of the oil pump is incorrect, and the actual use of the pump is lower than the rated value.
Sweeping method: replace the pump, replace the big motor
2. The motor does not reach the rated power.
Sweep method: replace the motor
3, wiring problems, three-phase wiring head bolt loose and wrong line.
Sweeping method: Check whether the lines in the electrical box of BRY air-cooled centrifugal heat transfer oil pump are connected incorrectly and tighten the head bolt.
4, thermal relay quality difference sweeping method: Bo Taibang replacement thermal relay
5, BRY air-cooled centrifugal heat transfer oil pump has debris, rolling is not sensitive, and the motor load is aggravated.
Sweeping method: Clear the debris in the pump and adjust the deviation of the coaxiality.
Http://news.chinawj.com.cn
Valve & Fitting & Compone,Valves & Fittings,An Valve Cover Fitting,Pipe Valve & Fitting Company
Ningbo Kyson Cool Electronic Technology Co., Ltd. , https://www.kysonrefrigeration.com