The wooden flooring used in Dongsheng Furniture News needs regular repair and care, so floor waxing is an indispensable method to extend the life of the floor. So how do you wax the floor? Let's get to know it with Dongsheng Furniture Xiaobian!
1, waxing environment preparation
It is best to choose the floor waxing when the weather is better. Avoid the construction when the rain is high and the temperature is low. If the humidity is too high, the white turbidity will occur. When the temperature is lower than 5 degrees Celsius, the floor wax will change easily. Hard, not conducive to construction.
2, construction tools and floor wax preparation
A large area waxing machine often uses a waxing machine, and a small area uses a dust push or a soft cloth. Nowadays, many people also have a small size and light weight waxing machine, which can be easily used when waxing. If you don't have a waxing machine, you can use a simple tool such as dust pusher or soft cloth. Don't look at the tool is simple, but the waxing effect is not necessarily bad, but may be more detailed. In addition, the corresponding floor wax needs to be prepared.
3, finishing the clean ground
Before you start waxing, you need to arrange the furniture that needs to be waxed to determine the waxing area. At the same time, the floor area should be cleaned to ensure that there is no dust or other dirt before waxing to prevent the waxing finish. Cleaning Generally, wipe the floor with a wrung mop or a soft cloth. After cleaning, wait for the moisture on the floor to dry completely before waxing.
4, waxing
Shake the container with the floor wax and mix well. Dip the floor wax thoroughly with a clean rag or sponge, not to drip. Shake and mix the floor wax thoroughly. You can perform a partial test in an unobtrusive place to confirm that there is no abnormality and then wax the whole. Then use a clean rag or special waxing dust to fully dip the wood floor wax, carefully apply it according to the wood grain direction of the wood floor, the speed should not be too fast, do not leak or thick and uneven, keep thin and even.
5, polishing
Generally, the method of playing twice is used. After the first pass, the wax is played again. After each waxing, you must wait for a layer of wax to dry before you can apply a layer of wax. After it is completely dry, polish the surface with fine sandpaper or soft cloth.
The above is the information about floor waxing. For more information about furniture, please pay attention to Dongsheng Furniture.
Source: Dongsheng Furniture
related articles
Dongsheng Furniture teaches you how to choose a bedroom dressing table
What tile is good in the living room? Dongsheng tells you that it is the key to creating atmospheric effects.
Dongsheng Furniture reminds you to pay attention to the floor
Dongsheng Furniture introduces you to the knowledge of European retro furniture decoration
We are strictly abiding to the international production process standards, imported original production equipments from Germany and Taiwan to ensure the most advanced extrusion, rolling process and OUR OWN unique formulating of recipe to make the flooring safe, wear-resistant, stable, durable and Eco-friendly. There is a very good reputation of our Spc Stone Flooring, SPC Flooring is available in a variety of locations, such as our home, commercial, office, medical, school, etc. And you can enjoy the fun of DIY.
Stone Grain Vinyl Flooring,Spc Stone Flooring,Stone Grain Flooring,Indoor Pvc Flooring
Liaoning Schnell Interior Products Co., Ltd , https://www.schnellflooring.com