There is no shortage of sophisticated molds in heat-treated molds, which requires processors to apply more sophisticated techniques.
1. Reasonable material selection. For high-density molds, good-quality micro-deformation mold steels should be selected. Forging steels with severe segregation of carbides should be forged and tempered. Heat treatment should be performed on the mold steels with large or no forging.
2. For larger molds, it is necessary to grasp the laws of deformation and reserve machining allowances. Large and sophisticated molds can be used in combination.
3. Perform pre-heat treatment.
4. A reasonable choice of heating temperature and control temperature, can take slow heating, preheating and other methods of equalization to reduce the heat treatment mold deformation.
5. As far as conditions permit, the use of vacuum heating quenching and cryogenic treatment after quenching.
This article is edited by Zhongshan Huashi Fushun Special Steel Technology Department. Please call for more details.
Contact: Mr. Chen 18988586811
Service Hotline
Address: Road 105, Pingdong Industrial Zone, Sanxiang Town, Zhongshan City, Guangdong Province
1. Reasonable material selection. For high-density molds, good-quality micro-deformation mold steels should be selected. Forging steels with severe segregation of carbides should be forged and tempered. Heat treatment should be performed on the mold steels with large or no forging.
2. For larger molds, it is necessary to grasp the laws of deformation and reserve machining allowances. Large and sophisticated molds can be used in combination.
3. Perform pre-heat treatment.
4. A reasonable choice of heating temperature and control temperature, can take slow heating, preheating and other methods of equalization to reduce the heat treatment mold deformation.
5. As far as conditions permit, the use of vacuum heating quenching and cryogenic treatment after quenching.
This article is edited by Zhongshan Huashi Fushun Special Steel Technology Department. Please call for more details.
Contact: Mr. Chen 18988586811
Service Hotline
Address: Road 105, Pingdong Industrial Zone, Sanxiang Town, Zhongshan City, Guangdong Province
Solid Wooden Blades Ceiling Fan Light
Ceiling Fan Bulb Replacement,Ceiling Fan With Daylight Led,Small Bulbs For Ceiling Fans,Small Led Bulbs For Ceiling Fans
JIANGMEN ESCLIGHTING TECHNOLOGY LIMITED , https://www.jmesclightingfan.com