1. Construction Contents of Wooden Wall Skirts Wooden wall skirts are wall protection facilities constructed of wooden keels, plywood and decorative lines. They are used in the decoration of living rooms and bedrooms in home renovations. The general height is 900 mm. Plywood for panel materials can be fully utilized. . There are two kinds of wooden wall skirts: waist belt type and beltless type. When there is no belt in the wall skirt, the processing method of patchwork should be designed. Generally, there are three types of flat seams, eight-character seams, and line pressure seams. Lines are commonly used in home decoration. .
2. Construction Rules for Wooden Wall Skirts The construction of wooden wall skirts should be carried out under the conditions of strong, smooth and dry grass surface. Before the installation of wooden skirts, horizontal elevation lines and plate surface dividing lines shall be populated on the wall according to design drawings and dimensions. Holes are drilled at the lower side of the wall elevation control line by 10 mm, and holes are drilled on the sub-line to enter into the wood molds that have been treated with anti-corrosion treatment. The walls are then protected against moisture and fire-retardant. When nailing wooden keel, press keel spacing 400mm, vertical keel spacing 600mm, the keel is fixed with a round nail in the wall of the wooden mold, 5mm from the ground should be at the bottom of the vertical keel nail pad, pad width and keel Consistent, 3 mm thick, vent holes in the transverse keel, at least one per file. l Before installing the siding, size the material according to the size. When using the gluing, the size of the material is 800 mm. The outside of the wooden keel is glued, the wall panel is fixed on the wooden keel, and the nail is reinforced with the nail. Wallboard joints must be on the vertical keel and pressed with a pressure bar. A skirting board is installed at the bottom of the wooden wall skirt, and the skirting board is fixed on the wood floor and the wall board. The height of the skirting board is 150 mm, and the head is fixed on the wall board by wood lines. After the wooden skirt has been installed, it shall be immediately treated with a veneer and brushed with clear oil to prevent other types of work from contaminating the board.
3. Acceptance of wooden wall skirts The construction of the wooden wall skirts meets the design requirements. The embedded parts are treated with anti-corrosion treatment. The wood moisture content is less than 12% for wood keels and less than 10% for plywood. The panel timber species are uniform, the textures are similar, and the corner lines and skirting boards are closed. The material used for the wall skirts is the same. The day-measurement wall skirt panel has no dead knots, pith, rot, pattern, and color. It has the correct dimensions and dimensions, and the hand checks the paint film for bright, smooth, impervious to the floor, falling brush, and falling. Using a ruler to measure the wall skirts, waistbands and give feet, flatness error small hand 2 mm, the wall thickness error is less than 1 mm, the grid error is less than 1 mm.
4. The common quality problems of wooden wall skirts and the methods to deal with them The common quality problems of wooden wall skirts are twofold: in terms of structure, if the number of keels is small, and the plywood is thin and of poor quality, it can lead to unstable slabs and the number of keel should be increased. Reduce spacing or use thick plywood. In terms of construction, there are mainly patchwork joints that are not straight and the wood grain pattern is disorderly. After the joints are removed, the joints are trimmed and the position of the board surface is adjusted.
5. Estimated duration of wooden wall skirtings. Wooden wall skirts should be constructed after the roof and wall base are treated. Construction is completed before the completion of the project. Among them, the installation of wooden keels and panels in the three-bedroom and two-bay rooms takes about 20 workers. The complexity of the wall skirts will affect Duration. According to the difference in the use of paint and construction methods, paint construction will be different, usually takes 4 days, can be carried out with other wood surface paint at the same time.
Entrance decoration restaurant decoration paint decoration design home decoration paint space decoration living room bedroom design decoration style fashion small apartment small bedroom home design decoration home
We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting
Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.
While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.
Recessed Frame,Flush Mount Led Ceiling Lights,Frame Recessed Downlight,Recessed Led Downlight Frame
Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinlighting.com