>>> Related Links: Toilet Complete Selection Manual
Here are some tips about the stain-resistant toilet:
First, observe the toilet surface
First of all, a good toilet with good internal water flow is easier to clean the dirt. When purchasing, the first step is to look at the shape and structure of the toilet. The structural transition to the point where the transition is relatively gentle is usually strong. some.
Second, look at the glazed quality of the toilet, the quality of the glaze surface determines the smoothness of the product surface, thin glazed products, the surface of the pinhole and uneven glaze is more likely.
Second, test the water experiment
When conditions permit, when purchasing, it is required to flush with water in order to observe the water flow performance and surface smoothness of the toilet.
First of all, look at the contact area between the water flow and the toilet. This is related to the quality of the flushing. In particular, several dead spots that are easy to get dirty must be watched carefully.
Secondly, look at the lines of the water flow. If the water level is flat and the toilet is glazed, it is not easy to hide.
Finally, to see if there is any water accumulation inside, we usually observe whether there is any water accumulation in the tilt of about 5% in all directions of the water level, because the toilet may exhibit a tilt of about 5% in normal construction or after a period of use.
Ware purchase toilet
Tianrui Fiberglass Composites Co., Ltd. , http://www.sdfiberglassmesh.com