First, maintenance
1. Waterproof solid wood flooring is most afraid of water. In the summer, it is necessary to prevent rain and water from falling out of the window. In the winter, it is necessary to prevent the heating in the house from running. If you accidentally leak water, even a little tea, today's focus:
Also wipe it clean with a soft rag in time, keep it dry, so as not to push the gloss, or even cause warping, cracking, and mildew. If the indoor cement floor is wet and wet (this is the most likely situation in the bottom room), which causes mold deterioration, warpage, paint peeling, color variation, etc., it is necessary to solve the problem of returning water and then renovate. Change the floor.
2. The cigarette butts and matchsticks that have not been extinguished by fire shall not be randomly placed on the ground. Electric stoves, rice cookers, electric irons, electric soldering irons, etc., cannot be placed on them before the fireproof and anti-scalding layers are placed. Otherwise, it is easy to burn the wooden floor. Do not use dust or dirt on the surface of the gasoline to prevent static electricity from being generated by friction and cause fire.
3. Anti-damage solid wood flooring is also vulnerable. Even the finest ash, it is easy to wear the turbulence and color of its surface for a long time, leaving traces.
If there is already ash, you should wipe it with a semi-wet soft rag in time. It is best to put on the average prize slipper and then enter the room without bringing the gravel. Do not wear the soles with nails and iron palms until the hard soles are moving around and the surface is manipulated. Rough, heavy and hard objects must not be pulled on the wooden floor. When placing, it should also be placed on the protective cushion, and pay attention to it; the bottomed corners of the items, not to be placed directly on the wooden floor to prevent operation. If there is any operation, it should be repaired at any time. When repairing, whether it is nailing arrangement, specification form, or paint color, it is necessary to restore the original, and it is forbidden to be inconsistent and inconsistent with the whole wooden floor, affecting its overall beauty.
4. Anti-fouling solid wood flooring is also afraid of dirt. If it is a general dirt left by water-soluble substances, wipe off the dust first, then wipe it with a soft rag on the tea, the water or the orange peel soaked in orange peel. This can remove dirt and restore the turmoil of the paint film. If it is dirt, gum, oil paint, etc., it is not easy to remove it with gasoline. The reason is as mentioned above. The nature of the dirt must be carefully separated before deciding to use different methods and different cleaning agents to clean up. For detergents that do not clarify their chemical properties, they should not be used arbitrarily to avoid chemical damage to the paint and cause damage to the floor. Do not use it easily. Do not use a hard tool or tool that can damage the paint film to remove the spatula. Experts and masters should be consulted to decide on the solution.
Second, maintenance
1. Anti-fouling Every two or three months, you can hit the floor wax on the floor. Before waxing, the dust should be removed first, then waxed with a clean lint-free soft rag, starting from the edge of the wooden floor, and then rubbing on the surface of the board. After evenly wiping it again, use the original rag (no more wax) from the edge of the original wipe, and wipe it one by one according to the above scheme. The waxed floor surface not only cleans the zebra, but also refreshes it, and it also protects the paint film and delays aging.
2. After three or five years of painting, use the same paint on the original painted floor to paint the floor again. In addition to dust removal and descaling before painting, apply a finer water sandpaper, damp warm water, gently polish the surface of the board, grind off the residual oil on it, and grind the small paint particles left in the last paint. After polishing, wipe it with a clean rag and apply paint.
This painted floor will be smoother, cleaner and more radiant.
The daily cleaning of the composite wood floor is very simple, just vacuum with a vacuum cleaner, wipe it with a semi-wet cloth and a mop. Note that the mop should not be too wet and should be used after being wrung out. The surface of the composite wood floor has a very thin layer of crystalline Al2O3 wear layer, which will cause damage to the floor.
Therefore, if the composite wooden floor is accidentally contaminated with nail polish, ink, wine, etc., it should be immediately cleaned with a cleaning agent such as nail polish remover. Do not use sandpaper for polishing during use. Use chemicals such as cleaning agents with caution. Do not wax. , paint to prevent damage to the surface wear layer.
If some composite wood flooring is damaged and needs to be updated, the damaged part will be removed and reinstalled according to the installation procedure. Pay attention to the handling of the new boss's handover part, and the adhesive of the old board should be cleaned.
Maintenance of cork flooring
1. The maintenance of cork flooring is easier than other wooden flooring. During use, it is best to avoid bringing sand into the room. Some sand particles are brought in and the floor is not worn. Because the sand is pressed into the elastic layer under the foot, it will be ejected when the footsteps leave. Of course, it should be reminded here that it is not advisable to bring in too much sand, which will still cause flow wear. Therefore, the sand that is brought into the room should be removed in time. Generally, there is no need to equip the vacuum cleaner, and there is no need to worry about the warpage, mildew, etc. phenomenon.
2. If there is wear and tear in some places after three or five years of use, it can be partially compensated, that is, the coating is re-applied at the local part. The method is very simple, and the sand is gently sanded at the worn place to remove the scale on the surface. Then wipe it off with a soft dry cloth, recoat the coating, or apply a polyester film to the area.
3. For the surface painted cork flooring, the maintenance is the same as that of the solid wood floor. Generally, the floor wax can be used once every six months. Cork flooring with a resin-resistant layer on the surface is as simple as a composite floor.
Bamboo flooring maintenance knowledge
Correct use and maintenance are very important to maintain the beauty and durability of the bamboo flooring. In recent years, with the development of the bamboo processing industry, more and more users use bamboo flooring, and consumers are increasingly recognizing this product. However, due to the fact that some users do not know much about the maintenance of bamboo flooring, complaints have occurred during the course of use. Under this circumstance, it is necessary for manufacturers to do a good job in after-sales service, and consumers need to know the use of knowledge in order to maintain the interests of both the production and sales.
Bamboo flooring should pay attention to the following points in daily use:
(1) Maintaining a ventilated and dry environment
Frequently keeping indoor ventilation, the chemical in the floor can be volatilized as much as possible, discharged to the outside, and the indoor humid air can be exchanged with the outdoor. Especially in the case of no one to live and maintain for a long time, indoor ventilation and ventilation is more important. It is common practice to open windows or doors frequently to convect air, or to use air conditioning systems and ventilation systems to create a clean, dry environment.
(2) Avoid sun exposure and rain
Some houses have sunlight or rain that can enter the indoor area directly from the window, which will cause damage to the bamboo floor. Sunlight accelerates the aging of paint and glue and can cause dry shrinkage and cracking of the floor. After the rainwater is wet, the bamboo absorbs moisture and causes expansion and deformation, and the floor will be mildewed. Therefore, special attention should be paid to daily use.
(3) Avoid damage to the floor surface
The paint surface of the bamboo floor is not only the decorative layer of the floor but also the protective layer of the floor. Therefore, the impact of the hard object, the scratch of the sharp object, the friction of the metal, etc., and the chemical can not be stored indoors. In addition, indoor furniture should be handled with care when moving, and the feet of the furniture should be padded with rubber skin. In public places, carpets should be laid on the main passages.
(4) Correct cleaning and care
During daily use, the floor should be cleaned regularly to keep the floor clean.
When cleaning, first clean the dust and debris with a clean broom, then wipe it with a rag that wrings out the water. If the area is too large, clean the cloth mop, then hang it up and drip the water droplets. Drag the ground. Do not wash with water, or use a wet rag or mop. If water is spilled on the ground, it should be dried immediately with a dry cloth.
If conditions permit, a layer of floor wax can be applied at intervals to enhance the protection of the floor. If the paint surface is damaged, you can use the ordinary varnish to make up or ask the manufacturer to repair it.
Solar cells use sunlight to generate electricity. As long as the sun shines on the battery, it will continue to generate electricity. It is a clean energy with the advantages of safety, reliability, no noise and no consumption of raw materials. It has the advantages of great convenience for residents in remote areas. So what is the working principle of solar energy? Today we'll explore it. Solar cell is a device that directly converts light into electric energy through photochemical effect. When sunlight shines on the semiconductor pn junction, a new hole (electron pair) is formed. Under the action of the electric field, the hole flows from the N region to the p region, and the electron flows from the p region to the N region. After the circuit is connected, a current is formed to convert light energy into electric energy.Solar panel, also known as solar cell module, is a kind of photoelectric semiconductor sheet that uses sunlight to directly generate electricity. It is an assembly composed of several solar cells assembled on a plate in a certain way. It is the core part of the solar power generation system.The earth, the green home for human survival.
With the development of human civilization, it has gradually become a victim of economic growth. Clean energy is imminent.
The sun concentrates 99.87 percent of the mass of the solar system, and one twenty-two percent of the energy radiates to the earth, becoming the main source of photosynthetic heat on the earth. Solar energy is one of the cleanest, most lasting and most magical energy of all.
Photovoltaic System,Solar panels,Solar controller,High power inverter,Household solar panel,Monocrystalline silicon solar panel
Rugao Yaou Import & Export Trade Co., Ltd , https://www.ntyaous.com