Overhead floor maintenance and care rules

Overhead floor is anti-static overhead floor, which is a kind of anti-static floor. Due to the special use environment of overhead floor, attention should be paid to the following points during use!

(1) Disable the use of sharp, sharp-edged tools on the decorative surface of raised floors to prevent direct damage to the antistatic properties and aesthetics of the decorative surface.

(2) In the course of use, it is forbidden for the personnel to jump directly from the height to the raised floor, and to brutally handle and bruise the raised floor when the article is moved.

(3) When carrying goods on an overhead floor. It is forbidden to push objects directly on the board surface so that the objects directly rub against the ground and cause scratches on the board surface.

(4) When transporting items, use a cart with a rubber wheel to carry the object or transport it or place a spacer between it and the raised floor. Prevent damage to the board surface.

(5) When placing heavier items on the raised floor, it should be placed smoothly so as not to injure the floor.

(6) When using and maintaining the equipment in the space below the raised floor, use an overhead floor sucker to install the overhead floor, and disassemble and install the overhead floor to be light and light so as not to damage the raised floor.

(7) Clean the surface of the board with a net of mops and rags during use. Be careful not to spill a large amount of detergent liquid on the raised floor so that the liquid does not flow under the raised floor and affect the normal operation of the lower lines and equipment.