Special tools use maintenance and maintenance:
1. Wrench products should not be used excessively, and it is not necessary to use sleeves or other metal Bars to lengthen the arm, and to use the hammer to strike (except for the wrench).
2, the cutting edge tool should be placed in the sink and gently touch the grinding wheel for sharpening, the force is too strong and the time of contact with the grinding wheel is too long.
3. In the actual operation of the knocking tool, it is necessary to remove the oxides on the scene and the corrosion of the working surface to prevent the third party from colliding.
4. All kinds of tools should be cleaned of surface oil before use. Refer to the manual for steel tools.
5, tapping tool products, can not be continuously hit, more than ten times should have a proper interval, and at the same time timely remove the debris from the product parts and then continue to use.
6. After use, clean the surface dirt and accumulation, and store in a dry and safe place.
According to the above performance and use, it is more suitable for normal pressure equipment and less demanding environment (such as gas stations, small oil depots, etc.) during normal use.
Concerned about surprises
Previous: Self-locking nut common four series of classification application inventory Next: Kitchen and bathroom hardware can not be ignored but can not be ignored
Flange Bolt,hex flange bolt,flange head bolt
Jiangsu Minglu Stainless steel Co.,ltd , https://www.minglufastener.com