Take responsibility. Using the best products to manufacture high quality, good management, ask the majority of the national, Shenzhen, Guangzhou customers to provide the best sorting machine, inkjet conveyor belt, baler, sealing machine, labeling machine and other automatic packaging device.
There are many types of food packaging machinery, the application range is very wide, and the development speed is very fast. New packaging machinery is constantly emerging, and it is difficult to summarize the classification, but from the basic structure and principle, it is still possible to find something common. Generally speaking, the packaging machinery consists of the power part, the transmission structure, the packaging work actuator, the control system and the fuselage (frame). Among them, the packaging work actuators have different packaging methods and requirements, usually Also includes the feeding mechanism of the packaging material (or packaging container), the feeding mechanism of the packaged food, the actuator of the packaging action, and the delivery and product discovery device.
1. Power part The power part is the driving force of mechanical work. In modern industrial production, it is usually an electric motor. In some cases, it also uses a motor or other power machine.
2. Transmission mechanism The transmission mechanism plays the role of transmitting power and movement. It is mainly composed of transmission parts, such as gears, cams, sprockets (chains), belts, screws, worm gears, etc. It can be designed as continuous and intermittent according to needs. Or the speed of the persuasion shirt.
3. Packaging work The packaging mechanism of the packaging machine is completed by the working organization. It is the core part of the packaging action. Most of the complicated packaging actions are implemented by strict moving mechanical components or robots, which are often mechanical and electrical. Or the comprehensive application of photoelectric effect elements and the law.
4. In the control system packaging machinery, from the power output, the operation of the transmission mechanism, the action of the working actuator, and the coordinated cycle between the various mechanisms, etc., are controlled by the control system, and the control method of the modern packaging machinery is mechanical. In addition to the type, there are electric control, pneumatic control, photoelectric control, electronic control and jet control. The selection of control methods generally depends on the level of industrialization and production scale. However, many countries still adopt control methods that are still mostly electromechanical.
5. The fuselage or frame body (or frame) is the rigid skeleton of the entire packaging machine. Almost all the hair and the mechanism are installed in its work surface or inside. Therefore, the body must have sufficient rigidity and reliability. Stability, the design should be the basin to make the center of gravity of the machine must be at the lowest state. However, it should also pay attention to reduce the support of the machine and reduce the floor space.
Hansen Machinery sincerely sells. 2012.11.24 Network Propaganda Department
Track Rail is mainly 4-Wire 3-circuit Track Rails and 3-wire track rails, which match Slim Linear Light and LED Track Line Lights.
The length of the track is generally 1m, 1.5m, 2m, of course, you can choose the length you want, and we can also cut it for you.
There are also several ways to install the track, including ceiling, hoisting, and embedding.
LE D Track line lights are directly embedded in the track, so no additional accessories are needed, but Slim Track Linear Lights need the track head to be connected to the track.
Led Track Light System,Track Light Ideas,Track Light Fittings,Track Light System
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelights.com