Wind Turbine Generator Sintered Neodymium Segment Magnet (UNI-Segment-oo2)

• Model NO.: UNI-Segment-oo2
• Shape: Arc
• Grade: N35
• Trademark: Unimag
• Origin: Ningbo China

• Application: Industrial Magnet, Motor Magnet
• Coating: Nickel
• Type: Permanent
• Specification: SGS
• HS Code:

Product Description
High remanece, high coercive force, high energy produces NdFeB magnet especially used in the line of motors, generator industry. 

Neodymium Magnet, NdFeB Magnet 
1): Size: D3--D280mm(round) 
Block up to: 220 x 220 x 50mm 
2): Grade cover N35-N52, N30M-N50M, N30H-N48H, N30SH-N45SH, N28UH-N40UH, N28EH-N38EH. 
3): Coating: Nickel, Zinc, Golden, Black epoxy, Grey epoxy, Phosphating and so on. 
4): Application: Motor, Speaker, Jewelry industry 

1. Material: Sintered Neodymium-Iron-Boron; 
2. Temperature: 80 ~ 220 celsius; 
3. Quality Assurance: 
ISO9001: 2000, RoHS report by SGS, CP65 Certificate, Reach Certificate 

4. The different size, shape, surface coating for your choise. 
Size customized; : 0.5-180mm or others for negotiation 
Shape: Disc(Cylinder), Block, Ring, Countersunk, Segment and more, trapezoid, irregular shape, customized shapes are available
Surface treatment: Ni, Zn, Epoxy, Gold, Silver, Tin, Ni+Cu+Ni and Cr3+Zn 




5. Grade: N35, N38, N40, N42, N45, N48, N50, N52 ( N, M, H, SH, UH, EH, AH ); 
N Series: N35 N38 N40 N42 N45 N48 N50 N52 80° C 
M Series: 35M 38M 40M 42M 45M 48M 50M 100° C 
H Series: 30H 33H 35H 38H 40H 42H 44H 46H 48H 120° C 
SH Series: 30SH 33SH 35SH 38SH 40SH 42SH 150° C 
UH Series: 28UH 30UH 33UH 35UH 38UH 40UH 180° C 
EH Series: 28EH 30EH 33EH 35EH 200° C 
AH Series: N28AH N30AH N33AH N35AH 220° C 

6. Specification 
Neodymium Magnet 
1) High quality consistency 
2) Excellent anti-corrosion property 
3) SST: 48/72 hours 
4) Low weight loss 

7. Direction of magnetization 
A. Thickness Magnetized 
B. Axially Magnetized 
C. Diameter Magnetized 
D. Multi-poles magnetized 
E. Radial Magnetized 
F. Customized specific requirements magnetized 

1. Product introduction

   Coal-based Column Denitrification Column Activated Carbon is cylindrical black particles. It has many characters, such as high porosity, high sulfur capacity, high desulfurization efficiency, large surface area, light weight, strong adsorption capacity, wear resistance, good water resistance, low air resistance, easy regeneration, not easy to break under high pressure etc. It is a commonly used in adsorbent.

2. Adsorption purification principle and process

   Coal-based denitrification Activated Carbon is divided into large pores (pore size greater than 50nrrt), the middle hole (pore size between 2 ~ 50nm) and micro-pore (pore size less than 2nm) three categories.

The denitrification activated carbon is by active carbon`s adsorption and catalytic activity of activated carbon. The strong catalytic effect of the active carbon for sulfur dioxide in gas, and a small amount of Oxygen in the oxidation reaction, the reaction of elemental S adsorbed the surface of activated carbon. When activated carbon desulfurization agent the adsorption reaches saturation, the desulfurization efficiency decreased obviously, it must carry on the regeneration. The regeneration of active carbon adsorption depends on the material, sulphur began to melt under atmospheric pressure is 190 degrees, 440 degrees Celsius will sublimate into gas, therefore, the general use of superheated steam temperature of about 450-500 degrees Celsius for the regeneration of activated carbon desulfurization agent. When the desulfurization agent reach high temperature, the elemental sulfur separate out activated carbon, the precipitation of sulfur into sulfur recovery pool, water cooled to form solid sulfur.

Column Denitrification Column Activated Carbon

Column Denitrification Column Activated Carbon,Activated Carbon,Biochemical Activated Carbon,Black Amorphous Activated Carbon

Ningxia YiFeng RuiDa Activated Carbon Co.,LTD , http://www.nxyfrdhxt.com