Flange ring: The flange ring is the seal ring. Many rubber bearings used between industrial bearings for shock absorption and abrasion are called flanges, and flanges for toilet seats are placed between the sewage outlet and the toilet water hole to provide a seal, so that the siphon seat The toilet is not leaky and the flushing effect is also better.
Water seal: Water in the toilet bowl. Prevents odor spills or small insects crawling out of the drain pipe.
Lip: An annular diarrhoea ring under the toilet. Its appearance is similar to the toilet seat. It can be generally divided into closed and open type. The closed lip has a uniform hole at the lower edge of the lip. The lower edge of the surface is an open type, which is the conduit for the water in the water tank to be drained and washed.
Pit distance: refers to the vertical distance from the wall to the center point of the toilet sewage outlet, generally divided into 300 mm and 400 mm pit distance, there are special pit distance, so be sure to first measure the size and then go to buy the toilet.
Waterway: The toilet's rear sewage pipe.
Water cover: The water surface in toilets. The wider the water surface, the less likely it is to contaminate dirt.
Flushing type: flushing water from the toilet bowl with a drop in water level.
Flush type: Use a strong water flow (usually a straight inlet pipe) to flush the water off toilet flushing method. Slurry can be quickly washed out in the flushing moment, the cleaning effect is good, and the pipeline is not easy to block. The flush type uses the momentum of the water flow to discharge the dirt. In order to increase the hydraulic force that drops from the water separation hole around the toilet bowl, the wall of the pool is usually designed to be steeper; in order to concentrate the water, the area of ​​the reservoir is small. The disadvantage of this kind of flushing method is that the flushing noise is large, and at the same time, due to the small area of ​​water seal, it is easy to produce scale.
Siphon: Siphon is a siphon that is formed by flushing water in the toilet's drainage pipe (usually called the trap) and drains the dirt. The structural feature of the siphonic toilet is a complete pipeline inside the toilet. The shape is laterally inverted and “S†shaped. The difference in water level when using water supply promotes the formation of siphonage. Since water is not used to wash away the dirt, the slope of the pool wall is relatively gentle, and the bottom of the pool also expands the area of ​​water retention. This solves the problem. Drawback noise is too large.
Jet siphon type: deodorant, good anti-splash effect. This is an improved type of siphon type toilet. Its structural feature is to add an additional injection channel on the basis of the siphon type toilet. The injection port is aligned with the center of the sewage pipeline inlet. The injection aperture is usually 20mm. When the water supplied by the water tank passes through the water circle, part of the water from the water separation hole flows out of the wall of the cleaning tank and then falls into the pool, and part of the water passes through the injection path and is ejected from the injection port. Its role is to use its large current of water to discharge dirt into the sewage pipeline. At the same time, the large-diameter water flow rate accelerates the filling of the sewage pipe to accelerate the formation of the siphon effect. Since the jet flow is performed underwater, the noise is reduced. This product is designed to consciously expand the area of ​​water retention and limit the depth of water retention, so it has good deodorant and splash protection.
Swirl siphon type: deodorant, good anti-fouling effect, less noise. The vortex is formed by flushing water from the side of the bottom hole of the bottom of the pool, and the sewage pipe is filled with the increase of the water level. When the level difference between the water surface of the toilet and the sewage outlet of the toilet is formed, the siphon is formed and the dirt is discharged accordingly. Other siphons are basically similar. Only the water supply pipe is located at the bottom of the urinal and leads to the bottom of the pool. The greatest advantage of this type of toilet is the use of the two functions of vortices and siphons. The vortex creates a strong centripetal force around the water surface, making the above Liquids and dirt are quickly drawn into the vortex and discharged as the siphon is generated. Therefore, the sewerage process is quick and complete, and the deodorant and antifouling effects are better and the noise is smaller.
Water-saving toilets: According to the mandatory provisions of the original Ministry of Construction, the flushing water volume should not exceed 6 liters per washing cycle. When the water pressure is 0.3 pascals, the stool flushing volume should be 6 liters per flush. 8 liters, urine rinse product once flushed 2 to 4 liters (if man-made two-stage flush, for the first paragraph and the second paragraph). Rinsing time is 3 seconds to 10 seconds.
Bidet: As the name suggests, this kind of sanitary ware is used to clean the lower part of the human body. Some manufacturers call it "female wash basin". Actually, both men and women can use it.
Shower: It refers to the shower nozzle.
Skirt: It is a hem around the bathtub. Skirts with skirts can be installed separately. If not, tiles will be installed around the bath to support them.
Shower screen: It is usually arranged in the shower area of ​​the bathroom. The model is divided into two types: hanging on the wall and directly on the floor. There are various showers, massage jets and connecting pipes on the top, and some even have other configurations such as radio.
Yuba: It is a device that is installed on the ceiling of a bathroom for heating. It is also called a multifunctional bathroom heater. The main sources of heat are infrared heating lamps and nickel-chrome wires. In addition to the heating function, Yuba also has the functions of ventilation, hair blowing, negative ions, and lighting.
One-piece integrated ceiling: Integrate heating, ventilation, lighting, metal ceiling four functions, namely kitchen heating and heating, ventilation, lighting installation and metal ceiling installation in one step, all completed by the manufacturer.
Wire Mesh,Metal Mesh,Steel Mesh,Stainless Steel Mesh
HENGSHUI YUZHENG IMPORT AND EXPORT CO., LTD. , https://www.yuzhengnails.com