Compared with the decoration of new houses, it is a systematic project to stop the renovation of second-hand houses, old repairs, and old houses, and there is a big difference both in the design and construction of houses. But as long as the decoration is good, the effect may not be worse than the new house. If you say that you want to do the best of the second-hand house wall decoration as much as possible, then it is extremely important to understand some of the knowledge about the second-hand house wall decoration design. Here I share a few about the second-hand housing renovation process and the matters needing attention, is absolutely useful for you in the second-hand housing, old room decoration.
Second-hand house wall decoration process
1. Wall base treatment
2. The wall surface of an ordinary old house generally needs to be removed by removing the original paint surface by spraying the surface with water first, then using a trowel or electric planer to remove the surface paint;
3. For old disrepaired walls, the surface has already had serious paint peeling off. The hot layer is powdered and sanded. It is necessary to remove the paint layer and the entire batch until it is seen as cement hot or brick.
4, then use the fly powder and cooked rubber powder mix and mix bottoming lot, then paint latex paint, the surface layer to be painted 2 to 3 times, the time between each pass is better than 24 hours.
It should be reminded that: During the refurbishment of the second-hand house, attention should be paid to the protection of the finished product. There will be dust when the wall surface is treated, and there will inevitably be putty, paint or other glue dripping, so be sure to do well in advance in the room. Protection of the finished product. In addition, many industrial coatings have more or less toxicity, construction should pay attention to ventilation, after construction must be volatilized at least a week before they can stay, so as not to cause harm to the health of the family.
Second-hand housing wall decoration considerations
Second-hand housing wall decoration: 1, brush latex paint
This is the easiest and most extensive form of decoration for the fence. It is generally used for the fence to stop the surface layer from being dealt with. It is leveled with putty, polished and lubricated, and then brushed with latex paint. Latex paint is the tributary of the wall in front of it. The upper part and the top part of the joint are made of plaster line, and the lower part is connected to the sky with a skirting line. This type of solution is concise and obscure. The room is wide and crystal clear, but it is short of change. Through hanging wooden frames, photos, tapestries, etc., with spot lights to light, stop decoration. It must be reminded that many light industrial paints have more or less toxicity, and they must pay attention to ventilation during the ground-breaking days, and they must be allowed to stay at home for up to one week after the ground is shaken to avoid inadvertently forming family members.
Second-hand housing wall decoration: 2, wallpaper
After the top layer is flat, cover the wallpaper. The variety of wallpaper is extremely large, there are hundreds of thousands of species, and the colors and stripes are extremely rich. The wallpaper is dirty and it's easy to clean up. New wallpapers can be wiped indirectly with a damp cloth. The old wallpaper can be used to expose the surface, so that it can be solved. Indirect pasting of new wallpapers is extremely convenient. The groundbreaking of wallpaper, the most important critical skill is the anti-mildew and solution to the shrinkage:
1) Anti-mildew solution. Before the wallpaper is cut and paste, it is necessary to solve the base surface first, and the fly powder can be added to the cooked rubber powder to stop the batch hot leveling. After it is dry, brush the enamel one or two times before cutting it.
2) The solution to contraction. The compactness of wallpaper is a difficult problem. To deal with it is to prevent it. A range must be set aside for a stack of 0.5mm. There are some people who are totally pursuing beauty and banning a certain stack. This is not appropriate. In addition, over-selling some of the more compact wallpaper.
Second-hand house wall decoration: 3, paving plate
The entire surface of the wall is covered with a base board and a decorative panel is affixed to it. The overall result is luxurious and luxurious, but it will make the room appear congested. There is another kind of wall covering with a plate such as a density board, but underneath it is painted with a red latex paint. The surface is not covered with a plate. It is a feature that uses a density board to cut the lunch and draws a straight edge. Through the splicing of panels to make curves, pits and other shapes, so that the wall surface to solve is both flat and detailed in shape, but also to prevent a sense of congestion caused by a small amount of use of the plate.
Second-hand housing wall decoration: 4, tile
Tiles are a school name in front of the renovation. A small number of tiles are used in the central wall of kitchens, toilets, and yards. The greatest strength of tile decoration is dirt resistance, and one of the secondary achievements is the solution of the waterproof layer. Due to the fact that there is a small amount of useful electricity in the center of the department, it is because the waterproofing on the wall should be more or less attention. There is no need to waterproof the hole house or the old house that needs to change the tiles.
Editing summary: The above is the analysis of the second-hand housing wall decoration process and precautions related to the introduction, hoping to help meet the needs of the friends! For more information, please continue to pay attention to our website, follow-up will show more exciting content. You can also purchase your favorite product on Qijia Mall!
Balcony wall decoration wall decoration diatom mud home decoration partition wall decoration wall decoration bedroom wall color second-hand housing wall decoration
Led Batten Light,Waterproof Led High Bay Light,Led High Bay Light,Led High Bay Lights
JIANGMEN MOSCOT OPTOELECTRONIC TECHNOLOGY CO.,LTD. , https://www.sensorsled.com