Pipette capacity (mL): 1, 2, 5, 10, 15, 20, 25, 50, 100; Traces 0.1, 0.2, 0.5, first-class, second-class, capacity (mL): 10, 25, 50, 100, 150,
200, 250, 500, 1000... quantitatively prepare the standard solution of the accurate volume or the non-standard grinding plug of the tested solution to maintain the original match;
Water leakage can not be used; can not be used directly, can be heated in water bath (8) Burette capacity (mL): 25, 50, 100, etc.; second-class, colorless; brown, quantitative acid, basic (or poly four Chlorine-ethylene piston) Capacity analysis Titration operation Piston should be used as original; leakage can not be used; can not be heated; can not store lye for a long time; test tube can not put chemical solution with rubber to react (9) micro-burette capacity (mL): 1, 2 , 3, 4, 5, 10, etc., the metered bath for the micro or semi-micro analysis titration operation only piston type; the remaining matters are the same as above (10) pipette capacity (mL): 1, 2, 5 , 10, 15, 20, Shanghai to Xinyu logistics company 25, 50, 100, first-class; second-class, accurate and accurate removal of a certain amount of liquid (11) straight tube pipette capacity (mL): 1, 2, 5, 10, 15, 20,
25, 50, 100;
Traces of 0.1, 0.2, 0.5, first class, second class,
Completely outflow, incomplete outflow, accurate removal of various amounts of liquid is only piston type; the remaining considerations are the same as above 077
Port Crane Transportation Machinery Equipment Safety Certification Management and Use Maintenance Practice Book Shanghai to Yichun Logistics Company
Page change continuation table name specification main purpose use precautions http://news.chinawj.com.cn
Submission:
Advantages and features:
Automatic igniting and tempering control, high efficient and quick. Can be linear single, double - sided a molding groove cutting.
Brand: Buluoer intelligent
Other name: Gantry Flame Plasma Cnc Cutting Machine
Cutting mode: flame cutting, Plasma cutting
Suit material: carbon steel, manganese plate, galvanized plate, stainless steel, copper steel, aluminium plate etc. metal plate materials.
Product describe:
This CNC equipment is aimed at metal plate materials baiting, not only the appearance of atmospheric but also stable operating, high working efficiency, long service life and it can be achieved cutting all kinds of design graphic. Widely used in various machine building industry of metal sheet cutting.
Product features:
Bilateral drive, high transmission accuracy, operating is stability.
Frame aging treatment, stable structure and non-deformation.
Can remote operation, convenient and efficiency, save labour.
Automatic temper control, safety and efficiency.
Full-automatic StarCAM/ FastCAM graphical editing software, simple nesting.
Flame/plasma dual-purpose cutting system, easy to operate and wide application range.
System has self-compensating, automatic positioning, automatic height-adjustment, break-point memory and automatic recovery function.
Cutting size customization, flame plasma sub-cutting options.
Product parameters
|
Type |
BLDH-3060 |
BLDH-4080 |
BLDH-5080 |
BLDH-60100 |
BLDH-80100 |
|
Track gauge(mm) |
3000 |
4035 |
5000 |
6000 |
8000 |
|
Effective cutting width(mm) |
2300 |
3300 |
4300 |
5300 |
7300 |
|
Machine width(mm) |
3500 |
4300 |
5500 |
6500 |
8500 |
|
Track length(mm) |
6000 |
8000 |
8000 |
10000 |
10000 |
|
Number of standard cutting torch(set) |
1 |
2 |
2 |
2 |
2 |
|
Input power |
AC380V/50Hz;AC220V/50Hz |
||||
|
Lift(mm) |
200 |
||||
|
Cutting thickness(mm) |
Flame cutting:5-150 Plasma cutting:1-30(According to the power supply size) |
||||
|
Cutting speed (mm/min) |
Flame cutting:100-1000 Plasma cutting:450-5000 |
||||
|
Idle speed |
0-8000 |
||||
|
Drive mode |
Bilateral drive |
||||
|
System |
Shanghai Jiaoda or Beijing Starfire |
||||
|
Operating accurancy |
±0.5mm |
||||
|
According to the power supply size |
|||||||
|
LGK-120IGBT |
LGK-200IGBT. |
||||||
|
No. |
Name |
Specification parameter |
Rrmark |
Specification parameter |
Rrmark |
||
|
1 |
Track gauge |
4.0m |
Transverse efffective cutting max. 3 m |
4.0m |
Transverse efffective cutting max. 3 m |
||
|
2 |
Track length |
8.0m |
longitudinal efffective cutting max. 6.5 m |
8.0m |
longitudinal efffective cutting max. 6.5 m |
||
|
3 |
Max. idle speed |
9000min |
|
9000mm/min |
|
||
|
4 |
Straight line position accuracy |
±0.2min |
|
±0.2mm |
|
||
|
5 |
Straight line position repeat accuracy |
±0.3mm |
|
±0.3mm |
|
||
|
6 |
Operating accurancy |
±0.5mm |
|
±0.5mm |
|
||
|
7 |
Height controller lift distance |
200mm |
|
150mm |
|
||
|
8 |
Flame punch cutting thickness |
6-80mm |
Carbon steel plate |
6-80mm |
Carbon steel plate |
||
|
9 |
Flama max. Cutting thickness |
200mm |
Carbon steel plate |
200mm |
Carbon steel plate |
||
|
10 |
Plasma punch cutting thickness |
16mm |
Stainless steel plate, carbon steel plate |
25mm |
Stainless steel plate, carbon steel plate |
||
|
11 |
Plasma max. Cutting thickness (Edge cutting) |
25mm |
Stainless steel plate, carbon steel plate |
40mm |
Stainless steel plate, carbon steel plate |
||
|
12 |
Inclination of plasma cutting surface |
5-8° (carbon steel plate) |
5-8°(carbon steel plate) |
|
|||
|
13 |
Roughness of plasma surface |
Ra12.5 |
Ra12.5 |
|
|||
|
14 |
Roughness of flame surface |
Ra25 |
Ra25 |
|
|||
|
15 |
Speed of plasma cutting |
50-4000mm/min |
50-4000mm/min |
|
|||
|
16 |
Speed of flame cutting |
50-700mm/min |
50-700mm/min |
|
|||
|
17 |
Drive mode |
Bilateral drive |
Bilateral drive (panasonic servo) |
|
|||
|
18 |
Number of cutting torch |
CNC flame cutting torch: 1, plasma cutting torch: 1 |
CNC flame cutting torch: 1, plasma cutting torch: 1 |
|
|||
|
19 |
Equipment accurancy |
Conformed or superior to ISO8206-1991, JB/T10045.3-1999 |
Conformed or superior to ISO8206-1991, JB/T10045.3-1999 |
|
|||
Flame plasma CNC cutting machine
Basic Equipment
|
No. |
Name |
Distribution |
Unit |
Quantity |
Remark |
|
1 |
Type specification |
BLDH4080 |
set |
1 |
Beam annealing |
|
2 |
Drive mode |
double-drive |
set |
2 |
Panasonic servo |
|
3 |
Drive reducer |
AEVELE |
set |
2 |
Taiwan |
|
4 |
CNC |
F2300TB |
set |
1 |
Shanghai Jiaoda |
|
5 |
FASTCAM |
Fast CAM Chinese version |
set |
1 |
Guoyou |
|
6 |
Flame cutting torch |
Wuxi Xiangzheng |
set |
1 |
Guoyou |
|
7 |
Plasma power |
Chengdu Huayuan LGK200 |
set |
1 |
Huayuan |
|
8 |
Arc voltage regulator |
Shanghai Jiaoda |
set |
1 |
system-provided |
|
9 |
Automatic ignite device |
Wuxi Xiangzheng |
set |
1 |
Guoyou |
|
10 |
Precision track |
24 kg |
m |
8*2 |
Wuxi |
|
11 |
Precision rack |
Straight tooth |
m |
6*2 |
Wuxi |
|
12 |
Pulley |
Nylon chain |
set |
1 |
|
|
13 |
Lift body |
2K2M |
piece |
2 |
|
Technical requriments
|
No. |
Name |
Distribution |
Remark |
|
1 |
Width of machine tool |
4000 |
|
|
2 |
Effective cutting wideth |
3100 |
|
|
3 |
Track gauge |
3710 |
|
|
4 |
Idle speed |
0~8000 mm |
|
|
5 |
Flame cutting thickness |
5~200 mm |
|
|
6 |
Plasma punch cutting thickness |
25mm |
user demand |
|
|
Plasma max. Cutting thickness |
45mm |
user demand |
|
7 |
Effective length |
6500 mm |
|
|
8 |
Cutting torch journey |
≤150 mm |
|
|
9 |
Accurancy |
± 0.5 mm |
|
|
10 |
Track length |
8m |
|
|
11 |
Input power |
AC220V/380V 50HZ |
|
|
12 |
automatic height-adjustment |
Jiaoda arc voltage height-adjustment |
|
|
13 |
Cutting material |
Stainless steel plate, carbon steel plate |
|
Cutting samples
Flame Cutting Machine,Plasma Cutting Equipment,Copper Cnc Cutting Machine,Cnc Plasma Slab Cutting Machine
Buluoer Intelligent Technology Co., Ltd. , http://www.buluoercuttingmachine.com