The water tank is an indispensable part of the toilet. Without it, the toilet will not work properly. Many toilets have been used for a long time and problems such as leaking water tanks have caused people to feel very distressed. So, what causes the leakage of the toilet tank? How to repair the toilet tank ? We immediately understand the relevant knowledge.
First, how to determine the toilet tank leak
1. Listening: There is a clear dripping sound to determine the leaking toilet.
2. Detection: Instill red ink in the toilet tank, stir well and see if there is red water out of the toilet water outlet. If there is, then there is leakage, otherwise, it means no water leakage.
Second, repair toilet tank method
Lift up the float arm. If the water stops flowing, the problem is that the float cannot be raised enough to press the valve plunger into the float valve. One of the reasons may be that the float ball is rubbing against the wall of the tank. In this case, bend the float arm slightly to leave the float valve out of the side wall of the tank.
2, if the float does not touch the tank, please grab the float arm and do not let go, then turn the float counterclockwise, remove it from the end of the float arm, shake the float to see if there is water, because the weight of the water will make the float The ball cannot be raised normally. If the water is thrown out before entering the water, then the float ball is newly loaded on the float arm. If the float ball is damaged or corroded, replace it with a new one. If there is no water in the float, replace the float and gently bend the float to lower it enough so that the float prevents new water from entering the tank.
3. If none of the above methods solve the problem, check the water tank ball plug at the flush valve seat. The chemical residue in the water may cause the ball plug to fail to move to a suitable position or the ball plug itself has decayed and the water will seep from the flush valve opening into the bowl below. Close the flush valve of the flush toilet and flush it to empty the tank. You can now check the tank ball plug for wear and if necessary, install a new ball plug. If the problem is caused by accumulation of chemical residue at the opening of the flush valve, remove the residue with some emery cloth, a wire brush, or a knife that does not contain water.
4. If there is still excess water flowing through the toilet bowl, it may be that the position of the steel rope of the lifting water tank ball plug is not good. This will cause the water tank ball plug to have a certain angle with the opening, and cannot plug the opening. Please ensure the steel rope. It is directly above the flush valve opening.
Editor's summary: The method of repairing the toilet tank is introduced here for everyone. The toilet has problems, and many friends will think of after-sales processing. In fact, friends may wish to check for themselves first. Small problems can be solved by themselves. If you really can't figure it out, look for the door after sale.
Toilet tank leak toilet tank leak repair toilet tank accessories toilet tank leak how to do curtain installation method
Weigh 50-300kg Electronic Scales
Weigh 50-300Kg Electronic Scales,Jewelry Scale,Hanging Grocery Scale,Hanging Measuring Scales
Shanghai Liuyuan Trading Co. , Ltd. , https://www.ly-weighing.com