Material selection <br>Material selection is very important in the decoration process, but the majority of friends are quite ignorant of this work, and now we will inform you about places that are easy to avoid, so as to avoid loss due to improper material selection.
1) The distance between the toilet pits. There are 30/40 pits in the market. Pay attention to the pit distance in your house and do not neglect it.
2) Countertop faucet and countertop basin. Countertop faucet has single hole/three holes, countertop basin also has single hole/three holes, single hole faucet can not be installed on three-hole basin, and vice versa.
3) floor length. The floor of the market has a 90\91 length, such as the use of 91 floors, floor grid with 30 grid files, then there is 1CM floor outside the grid outside the grid, causing the floor to have sound.
4) Sanitary equipment. Three-piece suit.
5) Aluminium buckle plate. Whether to distribute the keel
1, ceiling wood keel wool should use not less than 30 * 4mm white pine or red pine.
2, ceiling cover plate commonly used paper and cotton gypsum board, aluminum buckle board, PVC buckle board and so on.
3, the surface should not use multilayer board production.
Bathtubs There are three types of bathtubs in the market, cast iron cylinders, acrylic cylinders, and polyester agate cylinders, wicks, and resins. The latter three are not frequently used, and now the first three are used. analyse as below:
Cast iron cylinder: Advantages - smooth, smooth, luster, anti-fouling, easy to clean, long life;
Disadvantages --- The highest price, hardness and insulation is less than acrylic cylinder, color and shape are limited by the process so it is relatively single.
Supervision tips: pay attention to the glaze finish and flatness, pay attention to small cracks and defects, do not buy those who have orange peel on the surface of the cast iron tank, the better cast iron tank brand Kohler, TOTO, Le and so on.
Steel plate cylinder: Advantages - cheaper, lighter weight than cast iron, easy to transport and install.
Disadvantages --- The depth of the steel bathtub is shallow, the shape is monotonous, and the insulation effect is not very good. In addition, if the thickness of the steel plate cylinder is too thin, the bathtub will be easily deformed by force during transportation, installation and use, and severe flashing may occur.
Supervision tips:
Once the metal bathtub has a violent glaze, it will get rusty and it will not work properly. Better brands of steel cylinders include Kohler, TOTO, and Lejia.
Acrylic Bathtub: Advantages - Cheaper prices, good insulation. The back of the bathtub is a glass fiber reinforced layer, so the hardness is high. Acrylic cylinders of good quality can maintain a bright appearance for a long time and have a service life of more than 10 years.
Disadvantages --- Be careful during the construction process. Hard objects and sharp objects should not collide directly with the bathtub and cause damage. Supervision tips: Pay attention to the smooth surface of the bathtub, no obvious bumps. Well-known acrylic bathtub brands include Hecheng.
Molded door:
Molded door panel is made of wood from artificial forest, peeled, sliced, sifted, ground into dry fiber, mixed with phenolic glue as adhesive and paraffin, molded under high temperature and high pressure, is a kind of foot Line pattern of high density fiberboard.
advantage:
1. Green environmental protection: Phenolic resin is used as a binder in the production process of molded door panels. It does not contain free formaldehyde that is harmful to the human body and provides a safe guarantee for the living environment and human health.
2. Stable quality: Compared with natural wood, the molded door panel has the characteristics of tight texture, no cracking, no deformation, and the ability to prevent expansion, contraction and warpage.
3. Various functions: The doors can be divided into single doors, glass doors, louvered doors, sliding doors, folding doors, split doors and double doors. In addition, different levels of anti-theft, fireproof doors and soundproof doors can also be produced according to national standards.
4, the effect is significant: the door surface with a delicate, natural wood texture, whether painted with oil or table paint, wood texture is still clear, full of woody feeling.
Toilets
The toilets on the market are divided into four types according to the type of sewage: flush, siphon, siphon, and siphon swirl.
Wash-down toilet:
Advantages: The price is cheap, the water consumption is small, the sewage discharge effect is good, and the pool water area is small.
Disadvantages: It is noisy when sewage is discharged. The best brands of flush toilets include TOTO, Kohler and some domestic brands.
Siphonic toilet:
Advantages: There is a complete pipeline inside, the shape of the "S" is inverted, the slope of the pool wall is slower, the noise problem has improved.
Disadvantages: The area of ​​pool bottom water increases.
Siphon Jet Type:
Advantages: It is an improved type of siphonic toilet. Additional jets are added to increase the momentum of water flow and speed up the discharge of pollutants. The noise problem has been improved.
Disadvantages: Pool water area is larger.
Siphon Swirl Toilet:
It is the highest grade. Its structure is basically similar to that of other siphons, except that the water supply pipe is located at the bottom of the urinal and leads to the bottom of the pool. In order to adapt to the design requirements of the pipeline, the water tank and the toilet are integrated in the molding process. Its greatest advantage is the use of swirling and siphoning effects: the vortex creates a strong centripetal force, quickly entrains dirt into the vortex, and drains away dirt as the siphon is generated. The flushing process is both rapid and thorough, and the smell Small, low noise.
Supervision tips: toilet glaze should be smooth, smooth, no ripples, crystal color, no pinholes or impurities. As the flatness of the pool wall directly affects the cleanliness of the toilet bowl, the smoother and delicate the pool wall is, the less likely it is to contaminate the dirt; the pipeline should be relatively smooth, otherwise it will affect the sewage discharge, and counterfeit products often fail to do so.
Latex paint
For the decorating customers, the use of latex paint is more commonly used, and the more popular brands with higher material prices are Nippon Yongdeli, Midea, ICI, etc., and the decorating company's offer is for latex paints. The profit ratio is also relatively high, such as Nippon Yongdeli with artificial \ accessories \ main material about 31/M2, and in fact Nippon Yongdeli 5L installed about 110 yuan, about 30 square 2 brushing Degree, that is, about 3.5 yuan per square meter of main material, while the manual is 6.6 yuan / M2, accessories about 2.5 yuan, the total price of 13 yuan. If the 100 square meters of two rooms and one hall to calculate the total area of ​​latex paint About 350 square meters, so the decoration company's offer is about 10,000, the cost price is about 5800,
The profit is about 4000, amazing. But these, for ordinary customers because there is no professional knowledge to discuss the price with the decorating company.
Buy materials Door prices Lacquer decorating latex paint Le gypsum board Ceiling Ceiling Doors doors Glass doors Glass sliding doors Shutters
Single Cold Faucet,Modern Kitchen Faucets,Single Hole Kitchen Faucet,Single Handle Kitchen Faucet
AIHUI Sanitary Ware , https://www.fsaihuisanitary.com