Steamer describes the role and effect of steaming yarn [Steaming Machine] introduces technical parameters:
Each yarn processing time is about 1 hour.
Different models have different load capacities.
The energy consumption per ton of yarn is about 50KWh or 150KG steam.
With double steaming technology, the vacuum pump consumes about 2KW/h per ton of yarn.
Working temperature: 50 ° C - 120 ° C.
Working pressure: –0.085-0.1MPA.
Color touch screen plus PLC control.
Fully automatic switch door system (optional).
Steamer equipment introduction:
The mechanical indirect steaming machine is a uniform, precise and gentle steaming treatment equipment for yarns or fabrics from low temperature to high temperature. The microcomputer is used to control the steaming process, and the temperature control is accurate to ±0.5 °C to ensure the steaming process. The budget process is precisely reproduced, maximally avoiding the generation of condensate, allowing the yarn to be evenly and gently steamed.
After the yarn is adjusted by the machine's fast negative pressure saturated steam, it can be evenly increased from the inside to the outside, improve the quality, shape and shape, and maintain the original style of the original yarn, no yellow spots, no pollution, no deformation of the tube.
The ld indirect steamer uses high quality container plates for durability, safety, environmental protection and good pressure resistance. The device is started with one button and has good sealing performance.
The Indirect Steamer series has a wide range of products, ranging from square to round. The door opening method is various, the conveying yarn is more convenient, and the steaming yarn is more thorough.
Process principle and process:
The first step: vacuuming - extracting the dry air from the cylinder and the yarn by vacuuming
The second step: warming and humidifying - the negative pressure and saturated steam generated by the water tank can quickly penetrate into the inside of the yarn and quickly reach equilibrium, so that the temperature and humidity inside and outside the yarn are uniform.
The third step: temperature and humidity balance—the yarn is infiltrated by 100% saturated steam, and the inner and outer 3 layers of yarn reach the processing temperature at the same time, and are steamed at the same temperature, so the moisture regain of the yarn is uniform. The yarn friction coefficient is also consistent.
The effect and effect of steaming:
The force steamer is mainly used for the humidification and moisture regain of various yarn fibers in the textile industry and to improve the overall quality of yarn fibers.
Yarn regain rate increased by 1.5~3%
Yarn breaking strength increased by 15%
Yarn elongation at break increased by 20%
Yarn hairiness and fly flower reduced by 20%
Fixed slack, reducing backlash by 50%
Warp yarn reduction by 15%
Air jet loom efficiency increased by 2%
The yarn is soft, the fabric surface is clear, the yarn is pre-shrinked, and the dyeing is uniform
Remove static electricity and improve yarn unwinding
Feel softer and more ironed.
Sterilization and long-term placement of humidity does not decrease
Lide Machinery welcomes new customers to visit and negotiate cooperation.
Company website:
Http://news.chinawj.com.cn
Submission:
Biological Microscope ,Inverted Biological Microscope,Ibiology Microscopy,Discovery Biological Microscope
Ningbo Beilun Kalinu Optoelectronic Technology Co.,Ltd , https://www.kalinueot.com