First, the preparation of the lower tape When the two ends of the tape are overlapped with each other, the upper tape should be aligned with the running direction. Mark the upper tape and the lower tape.
1. Cut the end of the tape neatly, and cut the diagonal line according to the width of the tape and cut it.
2. In the working section, mark the length of the connection parallel to the beveled edge, draw a line parallel to the beveled edge, and use the layering knife to layer the first layer of fabric layer along the line and tear off the first layer. Layer fabric layer. Then draw a second line parallel to the beveled edge and tear off the rubber cover layer with a certain width, and cut the rubber layer with a knife to retain the edge of the tape.
3. In the empty section, draw a straight line parallel to the beveled edge from the beveled edge of the tape, tear off the rubber cover and chamfer the rubber layer with a knife to retain the edge of the tape.
4. Other fabric layers are scratched and peeled off according to the number of layers, and the edges of the tape are retained.
Second, the preparation of the upper tape is the same as above.
3. Inspection The two ends of the tape are stacked and the joints or braids are checked for proper fit or rest. In addition, it should be noted that the edges of the ends of the tape should be aligned.
4. Stack the two connecting faces 1. Carefully clean the bonding surface and clean it without damaging the fabric layer.
2. Brush the SC2000 cold vulcanized adhesive twice with a brush on the fabric layer and the edge of the tape. The first part must be completely dry, and the second time it is dried to a semi-dry state.
3. Align the upper tape to the lower tape accurately so that the two bonding faces are completely overlapped.
4. Compact with a compaction roller to vent air.
V. Seam The two joints are painted with a mixed SC2000 cold vulcanized adhesive, or a hot vulcanized rubber + vulcanized film, and dried to a semi-dry state. Seal the seal with a sealing strip, compact the roller to discharge the air, and heat the vulcanized upper machine. Baidu included
Bathroom Basin,Wash Basin,Hand Wash Basin,Counter Top Wash Basin
Duraplex Limited , https://www.fsduraplex.com